Advertisement Upgrade to remove ads

Which type of packet is addressed and delivered to only a single interface?

Unicast

Which type of address is used just like a regular public routable address in IPv4?

Global Unicast

Which type of address is not meant to be routed?

Link-Local

Which type of address is not meant to be routed to the Internet but is still globally unique?

Unique Local (used to be called site-local)

Which type of address is meant to be delivered to multiple interfaces?

Multicast

Which type of address identifies multiple interfaces, but packets are delivered only to the first address it finds?

Anycast

Which routing protocol uses multicast address FF02::5?

OSPFv3

IPv4 had a loopback address of 127.0.0.1. What is the IPv6 loopback address?

::1

What does a link-local address always start with?

FE80::/10

What does a unique local unicast range start with?

FC00::/7

Describe a global unicast address?

These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4.

Describe a unicast address?

Packets addressed to a unicast address are delivered to a single interface.

Describe a link-local address?

These are like private addresses in IPv4 in that they are not meant to be routed over the Internet.

Describe a unique local address?

These addresses are not meant for Internet routing purposes, but they are unique, so it is unlikely they will have an address overlap.

Describe a multicast address?

Packets are delivered to all interfaces identified with the address. This is also called a one-to-many address.

Describe an anycast address?

This address identifies multiple interfaces and the anycast packet is only delivered to one device. This address can also be called one-to-one-of-many.

You want to ping the loopback address of your IPv6 local host. What will you type?

ping ::1

What two multicast addresses does OSPFv3 use?

FF02::5
FF02::6

What multicast addresses does RIPng use?

FF02::9

What multicast addresses does EIGRPv6 use?

FF02::A

Which command enables RIPng?

Router1(config-if)#ipv6 router rip 1

Which commands enable EIGRP?

Router1(config)# ipv6 router eigrp 10
Router1(config-rtr)#no shutdown
Router1(config-if)#ipv6

Which command enables OSPFv3?

Router1(config-if)# ipv6 ospf 10 area 0.0.0.0

Which of the following statements about IPv6 addresses are true? (Choose two.)
A. Leading zeros are required.
B. Two colons (::) are used to represent successive hexadecimal fields of zeros.
C. Two colons (::) are used to separate fields.
D. A single interface will have multiple IPv6 addresses of different types.

B. Two colons (::) are used to represent successive hexadecimal fields of zeros.
D. A single interface will have multiple IPv6 addresses of different types.

What two statements about IPv4 and IPv6 addresses are true? (Choose two.)
A. An IPv6 address is 32 bits long, represented in hexidecimal.
B. An IPv6 address is 128 bits long, represented in decimal.
C. An IPv4 address is 32 bits long, represented in decimal.
D. An IPv6 address is 128 bits long, represented in hexidecimal.

C. An IPv4 address is 32 bits long, represented in decimal.
D. An IPv6 address is 128 bits long, represented in hexidecimal.

Which of the following descriptions about IPv6 is correct?
A. Addresses are not hierarchical and are assigned at random.
B. Broadcasts have been eliminated and replaced with multicasts.
C. There are 2.7 billion addresses.
D. An interface can only be configured with one IPv6 address.

B. Broadcasts have been eliminated and replaced with multicasts.

How many bits are in an IPv6 address field?

128

Which of the following correctly describe characteristics of IPv6 unicast addressing? (Choose two.)
A. Global addresses start with 2000::/3.
B. Link-local addresses start with FF00::/10.
C. Link-local addresses start with FE00:/12.
D. There is only one loopback address and it is ::1.

A. Global addresses start with 2000::/3.
D. There is only one loopback address and it is ::1.

Which of the following statements are true of IPv6 address representation? (Choose two.)
A. The first 64 bits represent the dynamically created interface ID.
B. A single interface may be assigned multiple IPv6 addresses of any type.
C. Every IPv6 interface contains at least one loopback address.
D. Leading zeroes in an IPv6 16-bit hexadecimal field are mandatory.

B. A single interface may be assigned multiple IPv6 addresses of any type.
C. Every IPv6 interface contains at least one loopback address.

Name threee IPv6 translation mechanisms?

6to4 tunneling
ISATAP (dual stack) tunneling
Teredo tunneling

Please allow access to your computer’s microphone to use Voice Recording.

Having trouble? Click here for help.

We can’t access your microphone!

Click the icon above to update your browser permissions above and try again

Example:

Reload the page to try again!

Reload

Press Cmd-0 to reset your zoom

Press Ctrl-0 to reset your zoom

It looks like your browser might be zoomed in or out. Your browser needs to be zoomed to a normal size to record audio.

Please upgrade Flash or install Chrome
to use Voice Recording.

For more help, see our troubleshooting page.

Your microphone is muted

For help fixing this issue, see this FAQ.

Star this term

You can study starred terms together

NEW! Voice Recording

Create Set