Generating a quantity of ideas for a solution to a problem.
The most common views used in a three view orthographic drawing are
Front,Top, and Right Side
Can help to verify the quality of a design or process.
One of the steps in the design process that engineers go through to develop their knowledge base, stimulate creative thinking, and make informed decisions...
A graph of the vertical bars representing the frequency distribution of a set of data..
A full scale working model used to test a design concept.
An improvement of an existing technological product, system, or method of doing something ..
Is a sketch that has text added to it to enhance the communication of the ideas/thoughts of the designer.
Is the most common method of communicating the shape and size of an object that is intended for manufacture.
The basic dimension on a detail drawing that indicates the distance from bottom to top.
The basic dimension on a detail drawing that indicates the distance from left to right.
The basic dimension on a detail drawing that indicates the distance from front to back.
The first view placed or created in a 3 view drawing or sketch.
The lines that indicate where the parts originated from .
The first part brought into an assembly is known as the base component.. this part is
The darkness and thickness of lines used on drawings and sketches.
A person who is trained in and uses technological and scientific knowldge to solve practical problems.
The area of the inventor screen that shows the 'history' of how the model was built
DOF stands for
Degrees of Freedom
The organization that sets the standards for drawing symbols,line conventions and dimensioning practices
Another name for reference dimensioning is..
Placed Features such as hole, shell, and chafer are all..
If a designer/engineer needs to calculate how many quarts of paint are needed to double coat 500 of one particular part in an assembly, what physical property would you need to know?
37.28 in cubed is the answer to a physical property of calculation. What physical property calculation does it represent?
Is a series of drawings and views with proper annotations needed to manufacture and assemble a design.
Extension line gap distance, precision, units, trailing, zeroes, and terminator size/type are all options that can be set as part of the ______ in a 3D modeler.
One group of people that provides a means for designers and engineers to comunicate drafting standards clearly and axxurately is ANSI. What does ANSI stand for?
American National Standards Institute
Many times a small assembly is created and then brought into a larger assembly. The small assembly is commonly referred as an..
How many DOF remain on an ungrounded part after a single insert constraint has been applied?
How many DOF are on a grounded part in an assembly?
In what instance would an engineer need to create an auxiliary view?
The part has an inclined surface with a slot machined on it
What type of hole should be modeled if the hole must be able to have a bolt tightened into it?
Close, Loose, and normal are options that can be selected for creating what type of hole?
If a sweep feature operation needs to be preformed, what sketch geometry needs to be created?
Path and closed profile
The coordinate system that has all points referenced from the origin is called
The coordinate system that uses a distance and an angle to plot points is called