1.
A prolonged drop in voltage describes what electrical anomaly?: Brownout
2.
A proper climate-controlled environment for electronics components is: 68-72 degrees F, or 20-23 degrees C and 40-60% humidity
3.
A water sprinkler system in which no water is initially present in the pipes and which, at activation, delivers a large volume of water describes what type of system?: Deluge system
4.
Businesses face new and complex physical security challenges across the full spectrum of operations. Although security technologies are not the answer to all orgnizational security problems, if applied appropriately what will they provide?: They can enhance the security envelope and in the majority of cases will save the organization money
5.
Electrical fires are classified as what type of fire and use what type of extinguishing methods?: Class C; CO2 or FM-200
6.
Hazards to consider when an company decides to inhabit a building are:: natural disasters, local crime, access roads, tenants, air and road traffic, vandals/burglars, police, fire station, medical
7.
In order to deter casual trespassers, fencing should be a minimum height of: 3 to 4 feet
8.
Laminated glass is made from tow sheets of ordinary glass bonded to a middle layer of resilient plastic. When it is struck it may crack but the pieces of glass tend to stick to the plastic inner material. This glass is recomended in what type of locations?: Street-level windows, doorways, and other access areas
9.
Lighting for proper perimeter protection should be: eight feet in height and two feet out
10.
Portable CO2 fire extinguishers are classified as what type of extinguishing system?: Gas-discharge
11.
Temperature at which damage to IT equipment occurs: 175 degrees Fahrenheit or 79 degrees Celsius
12.
The primary function of a physical protection system is?: Deter, detect, delay and respond
13.
The strategy of foming layers of protection around an asset or facility is known as:: Defense-in-depth
14.
The three elements of the fire triangle necessary for a fire to burn are:: Fuel, Heat, and Oxygen
15.
To successfully complete a vulnerability assessment, it is critical that protection systems are well understood. This objective includes:: Threat definition, target identification, and facility characterization
16.
Types of intrusion detection systems (IDSs) used for physical securty include:: Electromechanical - change or break in circuit, Photoelectric - change in light beam, Passive infrared (PIR) - change in heat waves, Accoutsical detection - sound, Vibration sensors - vibrations, Wave-pattern motion detectors - frequency, Proximity or capacitance detector - magnetic field
17.
Unauthorized access (internal and external), explosions, damage by angry employees, employee errors and accidents, vandalism, fraud, and theft are examples of what type of threat?: Manmade
18.
What are the main types of fire detection systems?: Smoke activated, Heat activated
19.
What are the two types of proximity cards used infacility access?: user activated and system sensing
20.
What crime reduction technique which is used by architects, city planners, landscapers, interior designers and security professionals with the objective of creating a physical environment that positively influences human behavior?: Crime prevention through environmental design (CPTED)
21.
What functionalities are commonly available on many cipher combination locks that improve the performance of access control and provide for increased security levels?: Door delay, Key override, master keying, and hostage alarm
22.
What type of cabling should be used below raised floors and above drop ceilings?: Plenum-rated
23.
What types fo voltage fluctuations are associated with power excess?: Spike - momentary high voltage, Surge - prolonged high voltage
24.
What would be the most appropriate interior sensor used for a building that has windows along the ground floor?: Acoustic and shock wave glass-break sensors
25.
When using portable computing equipment or media, regardless if it is being used inside the facility or is being removed for legitimate business outside the facility, simple protection methods need to be employed in order to maintain the security of the equipment. These consist of ____: Cable locks, encryption, password protection, and increased awareness
