| Term | Definition |
| The quantity and location of chairs are indicated in which document? | Construction dawings |
| Window treatments in office buildings ... | must meet NFPA 701 |
| Contract administration includes ... | Competitive bid process, furniture ordering, site inspections and punch list. |
| Most federal agencies require a smoke density of ... | 450 or less |
| Examples of non-restrictive or open specifications | Descriptive, performance and reference |
| What is an open specification | proprietary |
| Interior wall and ceiling textiles finishes are classified in accordance with which IBC specified testing method or standard? | ASTM E84 |
| How much accessible space has to be maintained below signs or ceiling projections | 80" |
| FOB factory/freight prepaid means | The buyer owns the item in transit, the manufacturer pays freight charges and the manufacturer bears the freight charges. |
| Hard line plans and elevations alone may not be sufficient for contractors to estimate the cost of a project. What else is needed? | Specifications |
| When trims and decorative finishes are kept to a minimum, they can usually have a lower rating then that typically required by fire codes. What is the percentage of wall and ceiling area that the trim cannot exceed? | 10% |
| A custom design, commissioned by a client and produced by a design firm, legally belongs to ... | The design firm |
| Which label is required by code for a 20-minute rated wooden door. | UL |
| Under what part or heading would you place the articles covering job site conditions, quality assurance and product delivery in a CSI specification? | General |
| CSI | Construction Specifications Institute |
| On which drawing should you check for the coordination of lights, sprinklers and HVAC diffusers? | Reflected ceiling plan |
| A door assembly rated for 45 minutes and equipped with a sidelight is typically used in what type of wall? | As an access door (in a 1-hour wall) |
| A tender or bid form ... | As a contract document it provides spaces for the bidder to supply the unit extended. |