1.
________all accidents or injuries.: Report
2.
_____vises when they are not in use.: close
3.
. _____tools should be carried with the edge or point held down toward the floor.: sharp
4.
16. Used rags are to be kept in a covered ______container.: metal
5.
A tool should always be held by the_______.: handle
6.
A__________must be worn when working where there is dust.: Dust Mask
7.
Always disconnect the power equipment before you make any major_____________.: adjustments
8.
Always wear eye: Protection
9.
Always work at a speed.: safe
10.
Always_________spilled materials.: Clean up
11.
Approved protection earmuffs should be worn around________ equipment.: Noisy
12.
Ask for_________when you need to handle large or heavy material: help
13.
Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________.: stopped
14.
Do not use__________________ equipment.: Defective or Faulty
15.
Don't anyone while they are operating the equipment: Distract
16.
Don't yank on the power cord to disconnect a tool. Pull the________.: plug
17.
Equipment with a ___________________ power cord should be reported to the instructor. It should not be used.: Damaged or Frayed
18.
Finishing materials should only be used in well _________ areas.: Ventilated
19.
Keep cabinet doors and drawers _______.: closed
20.
Lift with your______ not with your back.: legs
21.
Locate the _______________ and learn how to use them.: Fire Extinguishers
22.
Long hair must be ___________ or covered with a cap.: tied back
23.
Loose clothing can cause_______.: Injuries
24.
Never adjust equipment while it is _______.: running
25.
Never fool around or in the lab.: Play
26.
Never handle __________equipment if your hands are wet or if you are standing on a wet: electrical
27.
Never leave anything on the _________ that could be slipped on or tripped over.: floor
28.
Never use equipment until you have been properly___________ in its use.: Instructed
29.
Never wear gloves except when handling _______lumber.: Rough
30.
No __________ should be worn in the lab.: Jewelry
31.
Tools should be used only for what they are ___________.: Designed for
32.
Use a_______or a rag to clear away scraps and sawdust: brush
33.
Use all the recommended _______and other safety devices when you operate power equipment.: gaurds
34.
Use equipment only when the _________ is in the lab.: Instructor
35.
Use equipment with the instructor's: Permission
36.
Using tools and equipment required your complete at all time.: Attention
37.
Wear_____________ shoes or boots: Closed toe
38.
When you are finished with a tool return it to its__________________.: Proper location
39.
When you turn off a machine, stay with it until it is _____________stopped: completely
40.
Workbenches should be kept__________and organized: clear
