Always wear eye
Use equipment only when the _________ is in the lab.
________all accidents or injuries.
Do not use__________________ equipment.
Defective or Faulty
Never use equipment until you have been properly___________ in its use.
Loose clothing can cause_______.
Use equipment with the instructor's
Long hair must be ___________ or covered with a cap.
No __________ should be worn in the lab.
Never wear gloves except when handling _______lumber.
Wear_____________ shoes or boots
Approved protection earmuffs should be worn around________ equipment.
A__________must be worn when working where there is dust.
Finishing materials should only be used in well _________ areas.
16. Used rags are to be kept in a covered ______container.
Locate the _______________ and learn how to use them.
Keep cabinet doors and drawers _______.
Never leave anything on the _________ that could be slipped on or tripped over.
_____vises when they are not in use.
Workbenches should be kept__________and organized
Use a_______or a rag to clear away scraps and sawdust
Tools should be used only for what they are ___________.
. _____tools should be carried with the edge or point held down toward the floor.
A tool should always be held by the_______.
When you are finished with a tool return it to its__________________.
Ask for_________when you need to handle large or heavy material
Lift with your______ not with your back.
Never handle __________equipment if your hands are wet or if you are standing on a wet
Equipment with a ___________________ power cord should be reported to the instructor. It should not be used.
Damaged or Frayed
Don't yank on the power cord to disconnect a tool. Pull the________.
Use all the recommended _______and other safety devices when you operate power equipment.
Always disconnect the power equipment before you make any major_____________.
Never adjust equipment while it is _______.
When you turn off a machine, stay with it until it is _____________stopped
Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________.
Don't anyone while they are operating the equipment
Using tools and equipment required your complete at all time.
Always work at a speed.
Never fool around or in the lab.