Upgrade to remove ads
Tech Ed. Chapter 15 - Processing Material Resources
Terms in this set (46)
aluminum oxide. Alumina is the input to the second phase of making aluminum.
a long, square piece of steel.
a furnace commonly used in iron smelting.
a short, rectangular piece of steel used to produce structural shapes and rails.
the square, center section of a log.
a process that breaks down or builds up materials by changing their chemical compositions.
a process that changes hydrocarbon molecules into different sixes, both smaller and larger.
the center layer of plywood.
the process of breaking heavier hydrocarbons into smaller ones.
a layer between the faces in plywood.
a machine that has a number of blades on a shaft.
a process that breaks down or builds up materials by changing their chemical compositions
an outside layer of plywood
strands of glass used as the matrix for composite materials and insulation
a strand of glass used to transmit voice, television, and computer data at high speeds
glass that is changed into sheets for windows and similar products by floating the molten glass on a bed of molten tin
a process in which petroleum is pumped through tubes and heated until it becomes a series of hot liquids and vapors
a tower used to separate the different liquids and vapors in petroleum
zinc-coated steel used for automobile parts and containers
a material produced using thermal processes by solidifying molten silica in an amorphous state
a type of lumber produced from trees that lose their leaves at the end of each growing season
a very large band saw that cuts narrow slabs from a log
An annealing oven.
Wood used to make frameworks in residences or other types of structures.
A type of core used for plywood made from pieces of solid lumber that have been glued together to make a sheet.
A process that uses mechanical forces to change the form of a natural resource.
Plywood that has a core made of particle board.
A composite material made up of several layers of wood.
The basic input for steel making that results from thermal and chemical actions.
A conversion process that causes small hydrocarbon molecules to join.
To remove impurities or unwanted elements from a material being processed.
A machine that uses a group of evenly spaced circular or scroll-saw type blades to cut many boards at once.
A process used in petroleum refineries that breaks petroleum into major hydrocarbon groups.
A strip of steel used to form pipes.
A wide, flat piece of steel.
To extract metals from their ores using heat.
A type of lumber produced from needle bearing (coniferous) trees. Often used for construction.
An alloy of iron and carbon used for frameworks in industrial and commercial buildings.
The final step in the process of making steel in a basic oxygen furnace.
A type of process that uses heat to melt and reform natural resources.
tin-coated steel used to make food cans.
To add or remove chemicals to change the properties of petroleum products.
A machine that has a series of spaced blades.
A thin sheet of wood sliced, sawed, or peeled from a log.
The most common type of plywood. Made from alternating layers (veneers) of lumber.
THIS SET IS OFTEN IN FOLDERS WITH...
Tech Ed construction/ structures
Chapter 17 -Constructing Structures
Energy (Chapters 27 and 28)
Technology Education - Chapter 16 - Manufacturing…
YOU MIGHT ALSO LIKE...
Terms for Production & Processes
engineering manufacturing processes.
OTHER SETS BY THIS CREATOR
Manufacturing Chapter 13 - Production Engineering
Manufacturing Chapter 12 - Design Engineering
Manufacturing Chapter 2