Upgrade to remove ads
Technology Education - Chapter 16 - Manufacturing Products
Terms in this set (54)
Bonding technique that uses substances with high adhesive force.
To soften and remove internal stress in an object.
artificial intelligence (AI)
Intelligence a manufactured device or system exhibits.
The assembly process that uses cohesive and adhesive forces to hold parts together.
The material used to achieve bonding.
casting and molding process
give materials shape by introducing a liquid material into a mold
A change caused by adding chemicals.
The type of conditioning process that uses chemical actions to change the properties of a material.
A non-traditional machining process using chemical reactions to remove material from a workpiece.
A separating process using a tools to cut away excess material.
The joining process that uses extreme pressure to squeeze to parts together.
the act of mixing the parts of a fluid for casting
converted surface finish
A finish on the surface of a metal that has been chemically changes to protect the metal.
forming tools made of hardened steel
to run stock through a vat of molten metal.
A machine that pulls materials through a die opening to form materials.
to remove excess moisture from a material.
The range between a material at rest and the material's breaking point.
electrical discharge machining (EDM)
A non-traditional process that uses electrical sparks to make a cavity in a piece of metal.
A varnish that has colored pigment added.
molds that are used once and is destroyed to remove the cast item
A process where material is pushed through a hole in a die.
to hold parts together
A process used to protect or enhance a materials surface.
A thermal conditioning process used for ceramic products.
Cutting material to shape using burning gasses.
A method of joining materials using a metal alloy as bonding agent.
A process that passes a product under a flowing stream of finishing material.
A process in which force applied by a die or roll is used to shape materials.
the point when a material can not withstand any more force and breaks
A bonding technique that used heat or solvents to join materials.
drop or drive the ram down with a quick action
A process used to increase that hardness of a material.
To use heat to change the properties of a material.
have the desired shape machined into one or both halves of the die set
A place where parts meet.
A process that uses mechanical parts such as bolts or nails to fasten materials.
A separating machine that uses a rotating cutter for the cutting motion.
A die consisting of two flat die halves.
often made from steel, aluminum, or plaster, can withstand repeated use
To dip a material in solvent to remove unwanted materials.
a point at which the material can be stretched, bent, or compressed by a greater force
An electrolytic process.
slowly close the die halves by lowering the ram to produce a squeezing action
a fit in which friction between parts causes them to stay together.
programmable logic controller (PLC)
A device that uses a microprocessor to control machines.
A mechanical device that can perform tasks automatically or with varying degrees of human input.
use two rolls rotating in opposing directions to form the material
secondary manufacturing process
actions used to change industrial material into products
process used where material is removed to make the correct size and shape product.
used to form plastic objects
To opposing edges of blade or dies remove material.
To relieve internal stress in an object.
The point at which a material does not return to its original shape after being cut.
THIS SET IS OFTEN IN FOLDERS WITH...
Technology Education Part 2
Technology Education Final Exam
Tech Ed. Chapter 15 - Processing Material Resources
YOU MIGHT ALSO LIKE...
FOT Chapter 16
Terms for Production & Processes
engineering manufacturing processes.
OTHER SETS BY THIS CREATOR
Manufacturing Chapter 13 - Production Engineering
Manufacturing Chapter 12 - Design Engineering
Manufacturing Chapter 2
Energy (Chapters 27 and 28)