Only $35.99/year

DC-9: LOD

Terms in this set (91)

Fwd Cabin Door--
Norm Op - Remove and stow the evacuation slide girt bar. Rotate internal door handle clockwise. Push the door
outward and forward through the jamb opening. Ensure the hold-open latch is engaged.
Emer Op - Assess area through the door window. With the girt bar installed, rotate internal door handle clockwise. Push the door outward and forward through the jamb opening. The slide pack will pull out from its container and hang over the
doorsill. Ensure the hold-open latch is engaged. Pull the red slide inflation handle to inflate the slide.
Aft Passenger Entrance Door --
Norm Op - Rotate the door handle in the direction of the handle (clockwise) to unlatch the door. Swing the door inboard and secure it with the hold-open latch. Stairway is operated from the external control panel.
Emer Op - Assess conditions through the viewing port. Pull the door handle inboard and rotate clockwise to unlatch the door. Open the door and secure it with the hold-open latch. If ceiling is in the UP position, manually lower the ceiling to form the catwalk to the tailcone area. From within the cabin, pull the tailcone jettison handle on the stair control panel. Slide will inflate when tailcone is released. Pull the inflation handle if the slide fails to inflate automatically. Although a second tailcone jettison handle is located at the left aft portion of the catwalk, if the handle on the stair control panel fails, flight attendants are advised to redirect passengers to forward or overwing exits.