SCAD Fahion Tech
rising star pre-college, There are a few words I am missing
Terms in this set (32)
a finished edge on the inside of garments.
Flat catch stitch
a large cross-stitch used in finishing seams and in hemming.
Blind catch stitch
same stitch as the catch stitch used for flat hemming except that it is done between the hem and the garment. This stitch is more secure than the blind stitch, and is particularly good for heavy fabrics.
A row of machine stitching parallel to the seamline to keep facings from rolling to the outside.
Also known as tacking, used to temporarily hold together two or more fabric layers during both fitting and construction.
A piece of fabric that is used to finish the unhemmed or unfinished edges of a garment.
Bound button hole-
Buttonhole with edges finished with fabric rather than stitching.
are used to transfer individual pattern symbols, such as dots, to double layers of fabric.
Machine button holes
consist of two parallel rows of zig zag stitches, and two end finished with a bar tack as shown below. You need to have a special foot to make a button hole on the machine.
a triangular shape sewn together onto a flat piece of fabric, allowing the fabric to conform to the contours of a body.
a technique that involves cutting slits into the seam allowance of convex, or outward, curves to permit the edges of the seam to spread and lie smooth.
A fastener with interlocking rows of metal or nylon teeth
Diamond shaped notches-
Found on the cutting lines of patterns, these diamond-or- triangular shaped marks indicates where seams should match.
the direction of the fabric that runs parallel to the selvage
Center front fold
The center of the fabric. Example if you have a pattern and it is folded in half.
a firmly woven strip formed along each lengthwise edge of finished fabric.
Cross grain line
is perpendicular to the lengthwise grain.
is any diagonal that intersects the lengthwise and crosswise grain.
pulls the thread back after each stitch, so that the stitches will lay evenly into the fabric.
Pressure foot needle
you sew with interchangeable foot. That is how you sew zippers.
Stitch selector dial
changes the width of the stitches.
allows you to stitch in reverse
Two functions of reverse bar
To go backwards and secure the stitch and hold down halfway to change the length of the stitch.
Formula for sizing of button holes
Shapes of darts
French darts- extends diagonally from the side seam in the hip area to the bust.
Contour dart- a long, single dart that fits the waistline and then tapers off in two opposite directions to fit either both the bust and hip.
continuous dart- thread dart is one that is stitched in a way that leaves no thread ends to be tied at the point.
Makes the thread tighter or loser
This stitch is used to join two finished edges or to attach an unfinished edge to a straight edge or flat surface.
the usual hand stitch for finishing raw edges to prevent them from fraying.
blind hemming stitch
the same stitch as the catch stitch used for flat hemming except that it is done between the hem and the garment.
blind catch stitch
is a quick and easy stitch that can be used on any blind hem.
Is the paper that has the numbers and letters all over it. It is used for pattern making.
YOU MIGHT ALSO LIKE...
Aviation English - ICAO
Key Terms - Chapter 4, Key Terms - Chapter 7, Key Terms - Chapter 5, Key Terms - Chapter 6
OTHER SETS BY THIS CREATOR
Psych chapter 13
Psych 101 Chapter 12
Chapter 10 Psych 101
THIS SET IS OFTEN IN FOLDERS WITH...
Scad Intro to Graphic Design Test 1_Zash
Scad GRDS 201 Test 2- Zash
Scad GRDS 201 Test 3- Zash
First 9 Weeks Exam Graphic Design and Illustration