Study sets, textbooks, questions
Upgrade to remove ads
Arts and Humanities
Terms in this set (29)
Dimension and extension lines are thin so that they will not be mistaken for ___ lines.
What unit of measure is most commonly used on English drawing?
Datum dimensioning is preferred over continuous dimensions because it reduces ___.
What unit of measure is most commonly used on metric drawings?
Leader lines should not be horizontal or ___.
Dimensioning hidden lines under some circumstances is allowed. (true, false)
How many zeros to the right of the decimal does two thousandths on an inch have?
The drawing with the SI and the third angle projection uses what kind of measure?
Which line type does not have arrowheads?
A ___ is located in the circular view.
A cylinder's diameter is given in the ___ view.
A circular hole's diameter is placed in the ___ view.
A detailed drawing is an orthographic projection with ___.
A ___ aka a duplicated dimension is given within ___ and should be minimized.
A surface of the part that touches the datum plane.
X is the symbol used for repeated features. What else is it used for?
Dimensions generally take the form of linear dimensions, notes and leaders and ___ dimensions.
A complete circle such as a hole is dimensioned by its ___.
Which two lines have arrowheads? (List in alphabetical order).
When creating ___ lines, the following should be avoided: crossing leaders, long leaders, leaders that are parallel to adjacent dimension, extension or section lines, and small angles between the leader and the terminating surface.
3; 1; proportional; single; extension
The length and width of an arrowhead should be ___ to ___ and the width should be ___ to the line thickness. A ___ style should be used throughout the drawing and are drawn between the ___ lines if possible.
___ case letters should be used for all lettering unless a ___ case is required.
Dimensioning symbols replace text and are used to minimize ___ barriers.
uniform; 10; 6
The spacing between dimension lines should be ___ throughout the drawing. The space between the first dimension line and the part should be at least ___ mm. The space between subsequent dimension should be at least ___ mm.
dimension text should be ___ so it is read from the bottom up.
Longer dimension lines should be placed before shorter ones. (true/false)
___ lines should not cross extension lines or dimension lines. However, ___ lines can cross extension lines or visible lines.
The leader should ___ or lead from the arrow up to the text.
It is possible to have an exact measurement. (true/false)
Sets found in the same folder
Engineering Graphics Drafting 1-9
Series and Parallel Circuits
AutoCAD Written Final Review
Hydraulics Final Exam
Sets with similar terms
Dimensioning Drafting 1
Other sets by this creator
Ch 8 Solutions
Other Quizlet sets
Rome and Byzantine Empire Review
Genetics Exam 3
Watson, Addie 4th hour History sg 2
Economics Midterm 2