Upgrade to remove ads
Arts and Humanities
Gateway Video Final
Terms in this set (52)
NX-5 Rings from front to back
Focus- Zoom- Iris
On the NX-5, to adjust/compensate for very bright situations, especially outdoors, use the
Neutral Density (ND) Filter
Generally, if the most important (relevant) bright features of your shot have the zebra pattern at 70 on the NX-5, your exposure is
In manual mode on the NX-5, the AE (automatic exposure) shift button
is not used
The Visual Index on the NX-5 can be used to
quickly review the footage you have shot.
You can press the PUSH AUTO button on the NX-5 while in Manual Focus to
do a quick AUTO FOCUS.
Press the IRIS button on the Left-side of the NX-5 for
momentary Auto Exposure & change between Auto/Manual.
You should see F# in
display when set to Manual.
The switch below the GAIN button on the NX-5 adjusts the
By default, the L setting is set to
To adjust White Balance manually on the NX-5, use the
A or B switch
At HD 1080/24p FX on the NX-5, the recommended shutter speed is
To change from CAMERA, PLAY, EDIT, DUB/COPY and MANAGE MEDIA on the NX-5, use the
Press the ? button and then use the ? to scroll through various checks, including ?, ?, ?, ?, and ?
DIAL to scroll
audio levels, remaining battery, SD Card space, button assignments and output settings on the NX-5.
The recommended format for recording on the NX-5 is
HD 1080/24p FX
Before and after using the NX-5
do a full RESET, using a paperclip.
The SD card for the NX-5 should be erased before
returning the camera.
Keep most of the operating controls of the NX-5 - focus, iris, gain, white balance, shutter
on the NX5 should NOT be used all the time.
Push & hold ? for temporary auto focus (while in manual mode) on the NX5.
You can use ? as an assist to check the focus on the NX5.
Be sure to turn OFF ? before plugging in your microphone(s) into the NX5.
phantom power (MIC +48V)
circular metal meshes that, when placed in between the light and barndoors, reduce the overall brightness of the light.
four hinged, metal flaps on a light fixture that can be used to roughly shape the light.
When a light source is aimed at a reflective material and this reflected light is used to illuminate the subject
Assuming that you are in North America using 110v power and the electrical circuit you are using is 15 amps. The ? wattage the circuit can accommodate is ? Watts but the recommendation is to avoid exceeding ? Watts.
A traditional 3point lighting setup:
key, fill, back
Internal shadows are cast by the subject onto itself, resulting in
By adding Diffusion in front of the light, you will increase the
overall area of the light source, creating a softer light with softer wraparound.
On a bright sunny day, the sun is a very directional light source that causes
anodized, heatresistant aluminum foil used on light fixtures to prevent excess light spill or replace barndoors as a way of creating a more custom shape.
One of the least expensive and commonlyused bounces is foam core.
Supporting video footage that is relevant to what the interviewee is talking about is called BRoll.
A Wide Shot is used the ? often in an interview.
The actors never look directly at the camera if it is an
a very wide angle shot that shows the locale of the scene.
a shot of something other than the actors that will be edited into the scene.
wide enough to include all the actors in a scene
OTS in film and television is an acronym for
A shot that shows two characters related to one another usually from the waist up.
A two shot
A shot that is intended to show the audience what one of the characters is seeing.
is so close that only part of the actor's face is visible.
Placing actors within the frame to best tell the story is
part of the art of blocking.
Adjusting the positioning of the camera to convey a better angle is called
is a technique for compositing (layering) two images together. A color range in the top layer is made transparent, revealing another image behind.
By tracing an object, a silhouette (called a matte) is created that can be used to extract that object from a scene for use on a different background. This frame by frame procedure is called
is often handdrawn, and can be used to exclude parts of an image that another process, such as green screen, would not remove.
A Garbage Matte
Rotoscoping in the digital domain is often aided by Motion Tracking software, so frame by frame manipulation is
One classic use of traditional Rotoscoping was in the original three Star Wars films, where it was used to create the glowing lightsaber effect, by
creating a matte based on sticks held by the actors.
An effective starting point when color correcting black, midtone and white pixels is to use the
Eyedropper in Premiere Pro.
When doing color correction in Premiere Pro, the Waveform monitor can be used to show the
chroma (color hue) and luminance (brightness) of all the pixels.
For Chromakey to work properly in Premiere Pro, you would need to use the following track configuration:
Video 2 Green Screen Footage and Video 1 Background
YOU MIGHT ALSO LIKE...
DAD1 Photography Vocabulary
Photography 1 Vocabulary 1
OTHER SETS BY THIS CREATOR
Products: Gartner for Tech CEO's
Products: Gartner for start up CEOS
Sales Process, CEO Products and Solutions