Upgrade to remove ads
Lesson 5: Implementing TCP/IP in the Command Line
Terms in this set (52)
Microsoft's version of a command line interface or CLI.
Running the command prompt as an administrator is also known as running it in _____________.
This displays the help file for ipconfig.
Type the command __________ to retrieve an IP address and other IP configurations.
Used to test the existence of other hosts on the network.
Hostname / Ipconfig
To find out the host name of a computer, type either the command __________ or the command __________.
Ping -t [IP address]
This command option sends pings endlessly to a destination IP address.
Ctrl + C
The ping -t command can only be stopped by pressing this on the keyboard.
netstat -a (command)
This displays TCP and UDP connections.
netstat -an (command)
This displays TCP and UDP connections in numeric format.
netstat -e (command)
This displays Ethernet statistics such as the number of packets and bytes sent and received.
netstat -r (command)
This displays the route table.
netstat -s (command)
This displays statistics per protocol, such as TCP, UDP, ICMP, IP, etc...
This displays NetBIOS over TCP/IP statistics for local and remote computers.
nbtstat -r (command)
This displays NetBIOS name resolution statistics.
nbtstat -R (command)
This purges the contents of the NetBIOS name cache table.
netstat -RR (command)
This releases and refreshes NetBIOS names.
nbtstat -s (command)
This displays NetBIOS sessions and attempts to convert the remote IP addresses to names.
nbtstat -S (command)
This displays NetBIOS sessions and attempts to convert the remote IP addresses to names and the remote computers are listed by IP address.
Shows paths to a destination on another network.
tracert -d (command)
Shows paths to a destination on another network numerically.
Shows paths to a destination on another network as well as the degree of packet loss.
Displays information about DNS names and their corresponding IP addresses, and it can be used to diagnose DNS servers.
Used to take control of a remote computer.
A built-in command-line scripting utility that enables you to display and modify the network configurations of the local computer.
Enables you to display and make changes to the local IP routing table of the computer.
Routing Information Protocol (RIP)
A distance vector protocol that uses algorithms to decipher which route to send data packets.
Open Shortest Path First (OSPF)
A link-state protocol that monitors the network for routers that have a change in their link-state, meaning whether they were turned off/on/restarted.
Allows you to configure various networking options such as services.
net view (command)
Shows the computers on your immediate network, whether they operate as a workgroup or a domain.
Universal Naming Convention
This can be used when mapping drives and connecting to computers for other reasons.
Used in the command prompt to connect to FTP servers.
What command displays the IP address, subnet mask, and default gateway of the system you are currently on?
What protocol does the ping command use to test network connectivity?
What command do you use to clear the DNS cache on a local system?
What command do you use to test a system's IPv4 protocol stack?
What command do you use to display active TCP or UDP connections?
What command is used to display NetBIOS over TCP/IP statistics?
What command clears the NetBIOS name cache table?
What command tests netowrk connectivity while showing you each hop along the way?
What command tests network connectivity while showing you each hop along the way and degree of packet loss?
What command do you use to connect to a FTP server to download a file?
What command do you use to connect to a remote computer so that you can execute commands?
What command can you use to connect a mail server so that you can test SMTP?
What command do you use to display and modify the network configuration of a local computer?
What command is used to add static routes to a Windows computer?
What command do you use to display the routing table on a local system?
What command do you use to display the MAC address on a system?
Ipconfig /displaydns, Ipconfig /flushdns, Ipconfig /registerdns
What command do you use to retrieve or update your DHCP assigned configuration?
Ipconfig /release, Ipconfig /renew
What command do you use to register the computer's name and IP address with the nearest DNS server?
What command displays Ethernet statistics?
Ping -t [Ipaddress]
What option do you sue to ping constantly until you stop it?
THIS SET IS OFTEN IN FOLDERS WITH...
Lesson 6: Working With Networking Services
Lesson 2: Defining Networks With The OSI Model
Lesson 4: Understanding Internet Protocol
Lesson 8: Defining Network Infrastructures And Net…
YOU MIGHT ALSO LIKE...
(18/20) MTA 98-366 Networking Fundamentals
Lesson 5 Implementing TCP IP
IT chapter 5 vocabulary
TCP/IP Commands (summary)
OTHER SETS BY THIS CREATOR
How To Master The Art Of Selling Anything
Lesson 7: Understanding Wide Area Networks
Lesson 3: Understanding Wired and Wireless Networks
Lesson 1: Understanding Local Area Networking