Upgrade to remove ads
Ag Mechanics Tool ID Welding-Feilbach
Ag Mech CDE Tool ID- Welding
Terms in this set (29)
Arc Welder Power Supply
Converts AC power to welding current. SMAW and GTAW processes use constant current power supplies and GMAW processes use constant voltage power supplies.
A constant voltage power supply with a wire electrode feed. May be used with solid or flux core wire. Commonly used with a shielding gas (required for solid wire electrode). Common shielding gasses are carbon dioxcide and argon.
Uses an arc and compressed gas to create a plasma stream for cutting and gouging of ferrous and non-ferrous metals.
A colored lens filters out harmful light rays. Lens shades typically 10-12
Gauntlet style gloves are recommended.
Connected to the welding cable and holds the electrode for SMAW process welding.
Used to connect one of the cable leads from the welding machine to the welding table or the material being welded so as to make a complete circuit.
Holds a non-consumable electrode and directs shielding gas to the weld.
Used with a constant voltage power supply and a gas source (e.g. carbon dioxide, argon) for GMAW process.
Gas Flow Regulator
Used with GMAW and GTAW to control the flow of shielding gas.
One end of the head is shaped with a blunt point, and the other end is shaped like a cold chisel. Also called Slag hammer,
Non-consumable electrode used for GTAW process welding.
Tubular Wire Electrode
Tubular electrode (e.g. E-70T-L) is flux cored., and the last number is position and usability capabilities, as no gas is required for tubular flux cored rod. See Solid Welding Wire Electrode. Also called innershield wire since the shielding flux is "inside".
Solid Welding Wire Electrode
Identified in a similar manner as SMAW rod . For example ER-70S-4. Solid wire is classified in a ER means it is an electrode, 70 is tensile strength, S means it is solid wire, 4 is type of shielding gas. Shield Gases: 2. C02A-O,A-C02, 3. C02A-O,A-C02, 4. CO2, 5. CO2, 6. C02A-O, 7. C02A-O,A-C02 and C02=Carbon Dioxide, C02A-O=Carbon Dioxide, Argon and Oxygen, A-CO2 = Argon and CO2
Electrode used in the SMAW process for example E-6010. E meaning it is an electrode, 60 means it has a tensile strength of 60,000 PSI, 1 indicates welding in all positions, 0 indicates the coating to be cellulose sodium and the welding current is DCEP or direct current electrode positive
Hard Facing Electrode
Hard facing rod is not classified by a numbering system. Each manufacturer has their own nomenclature for their particular rod.
A tip with multiple orifices used to for heating metal usually for bending. Also called a rosebud.
Copper Coated Mild Steel
Available in 1/16 to 3/16 inch diameter and 36 inches long.
The larger center hole is for pure oxygen to oxidize or cut the metal.
The threads on the hose connector are right hand. Commonly a two stage regulator.
It consists of several needle-like round files of different sizes.
Quite often called a torch butt.
Used to protect the eyes from harmful rays and from spatter when using the welding torch.
The tips come in various sizes.
It consists of valves for mixing oxygen and acetylene, and a valve lever attached to the torch handle to release oxygen which does the cutting.
The threads on the hose connector are left hand.
Flux Coated Brazing Rod
Generally available in 1/8 inch diameter rod.
Available in1/16 to 3/16 inch diameter and 36 inches long.
Used for welding sheet metal.
THIS SET IS OFTEN IN FOLDERS WITH...
General welding terms-Feilbach
YOU MIGHT ALSO LIKE...
Chapter 4 Welding
Gas Tungsten Arc Welding
OTHER SETS BY THIS CREATOR
Welding Technology: Drawing and Welding…
Lesson 5 Ms Crivellaro
Medical Abbreviations "S-W TEST" Ms. Crivellaro
Medical Abbreviations "P-R TEST" Ms. Crivellaro