See Vocabulary, Key Concepts, and Software
Terms in this set (48)
Oblique pictorial where depth is represented as half scale compared to the height and width scale.
Oblique pictorial where height, width, and depth are represented at full scale.
A line which defines the center of arcs, circles, or symmetrical parts.
lightly drawn lines to guide drawing other lines and shapes.
The measurement associated with an object's front-to-back dimension or extent of something from side to side.
A measurable extent, such as the three principal dimensions of an object is width, height, and depth.
1. The documents that are required for something or that give evidence or proof of something. 2. Drawings or printed information that contain instructions for assembling, installing, operating, and servicing.
A formal graphical representation of an object containing information based on the drawing type.
The line along which two surfaces of a solid meet.
A regular oval shape, traced by a point moving in a plane so that the sum of its distances from two other points is constant, or resulting when a cone is cut by an oblique plane which does not intersect the base.
Line which represents where a dimension starts and stops.
Sketching which is done manually without the aid of instruments such as rulers.
A network of lines that cross each other to form a series of squares or rectangles.
The measurement associated with an object's top-to-bottom dimension.
A line type that represents an edge that is not directly visible.
A form of pictorial sketch in which all three drawing axes form equal angles of 120 degrees with the plane of projection.
Line which indicates dimensions of arcs, circles and detail.
1. A long thin mark on a surface. 2. A continuous extent of length, straight or curved, without breadth or thickness; the trace of a moving point. 3. Long, narrow mark or band.
Standardization of lines used on technical drawings by line weight and style.
Also called line width. The thickness of a line, characterized as thick or thin.
A line which indicates that a very long objects with uniform detail is drawn foreshortened.
To make something, especially on a large scale using machinery.
The process of using dimensions, quantity, or capacity by comparison with a standard in order to mark off, apportion, lay out, or establish dimensions.
A drawing which contains views of an object projected onto two or more orthographic planes.
A heavy solid line used on a drawing to represent the outline of an object.
A form of pictorial in which an object is represented as true width and height, but the depth can be any size and drawn at any angle.
A method of representing three-dimensional objects on a plane having only length and breadth. Also referred to as Right Angle Projection.
A form of pictorial sketch in which vanishing points are used to provide the depth and distortion that is seen with the human eye.
A sketch that shows an object's height, width, and depth in a single view.
A flat surface on which a straight line joining any two points would wholly lie.
A location in space.
An outline of an object when viewed from one side.
An imaginary surface between the object and the observer on which the view of the object is projected and drawn.
1. The relationship of one thing to another in size, amount, etc. 2. Size or weight relationships among structures or among elements in a single structure.
1. A straight-edged strip of rigid material marked at regular intervals that is used to measure distances. 2. A proportion between two sets of dimensions used to develop accurate, larger or smaller prototypes, or models.
Thin lines used in a section view to indicate where the cutting plane line has cut through material.
The representation of light and shade on a sketch or map.
Line which shows where part is broken to reveal detail behind the part or to shorten a long continuous part.
A two-dimensional contour that characterizes an object or area, in contrast to three-dimensional form.
A rough representation of the main features of an object or scene and often made as a preliminary study.
A three-dimensional body or geometric figure.
Technical Working Drawing
A drawing that is used to show the material, size, and shape of a product for manufacturing purposes.
Having the dimensions of height, width, and depth.
The general effect of color or of light and shade in a picture.
Having the dimensions of height and width, height and depth, or width and depth only.
A vanishing point is a point in space, usually located on the horizon, where parallel edges of an object appear to converge.
Colloquial term for views of an object projected onto two or more orthographic planes in a multi-view drawing.
The measurement associated with an object's side-to-side dimension.
YOU MIGHT ALSO LIKE...
The Slope Formula | Algebra Study Guide
IED Unit 2
Introduction to Engineering unit 2 vocab
Introduction to Engineering Design - Unit 2
OTHER SETS BY THIS CREATOR
3 Revit Keyboard Shortcuts
3. Revit Keyboard Shortcuts
1. Course Introduction
1. Set Up (PLTW GTT Class)
THIS SET IS OFTEN IN FOLDERS WITH...
PLTW IED Unit 1
PLTW IED - Unit 4
PLTW - IED Unit 5