Upgrade to remove ads
Only $2.99/month

Chapter 11 - Implementing Ethernet Virtual LANs

Terms in this set (17)

vlan vlan-id
Global config command that both creates the
VLAN and puts the CLI into VLAN configuration
mode
name vlan-name
VLAN subcommand that names the VLAN
[no] shutdown
VLAN mode subcommand that enables (no shutdown) or disables (shutdown) the VLAN
[no] shutdown vlan vlan-id
Global config command that has the same effect as the [no] shutdown VLAN mode subcommands
vtp mode {server | client | transparent | off}
Global config command that defines the VTP mode
switchport mode {access | dynamic {auto | desirable} | trunk}
Interface subcommand that configures the trunking
administrative mode on the interface
switchport access vlan vlan-id
Interface subcommand that statically configures the interface into that one VLAN
switchport trunk encapsulation {dot1q | isl | negotiate}
Interface subcommand that defines which type of trunking to use, assuming that trunking is configured or negotiated
switchport trunk native vlan vlan-id
Interface subcommand that defines the native VLAN for a trunk port
switchport nonegotiate
Interface subcommand that disables the negotiation
of VLAN trunking
switchport voice vlan vlan-id
Interface subcommand that defines the voice VLAN on a port, meaning that the switch uses 802.1Q tagging for frames in this VLAN
switchport trunk allowed vlan {add | all | except | remove} vlan-list
Interface subcommand that defines the list of allowed VLANs
show interfaces interface-id switchport
Lists information about any interface regarding administrative settings and operational state
show interfaces interface-id trunk
Lists information about all operational trunks (but no
other interfaces), including the list of VLANs that can
be forwarded over the trunk
show vlan [brief | id vlan-id | name vlan-name | summary]
Lists information about the VLAN
show vlan [vlan]
Displays VLAN information
show vtp status
Lists VTP configuration and status information
THIS SET IS OFTEN IN FOLDERS WITH...