How can we help?

You can also find more resources in our Help Center.

20 terms

Routing

Routing
STUDY
PLAY
What is the main difference between RIP and RIPv2?
RIP is a classful protocol, while RIPv2 is a classless protocol.
You have a private network connected to the Internet. Your routers will not share routing information about your private networkwith Internet routers. Which of the following best describes the type of routing protocol you would use?
IGP
Which of the following protocosl has a limit of 15 hops between any two networks?
RIP
Which of the following is a characteristic of static routing when compared to dynamic routing?
All routes must be manually updated on the router.
A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24. The router is configured to use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24. There is no default route configured on the router. The router receives a packet addressed to network 10.1.0.0/16. What will the router do with the packet?
Drop the packet.
A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24. The router is configure dto use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24. The next hop router for network 192.168.3.0 has changed. You need to make the change with the least amount of effort possible. What should you do?
Wait for convergence to take place/
You have a network configured to use the OSPF routing protocol. Which of the following describes the state when OSPF routers have learned about all other routes in the network?
Convergence.
Which of the following routing protocols divides the network into areas, with all networks required to have an area of 0 (area 0 identifying the backbone area)?
OSPF
What are the main differences between the OSPF and IS-IS routing protocols?
OSPF requires an area 0, while IS-IS does not.
A router is connected to network 192.168.1.0/24 and network 192.168.2.0/24. The router is configured to use RIP and has learned of networks 192.168.3.0/24 and 192.168.4.0/24. The router is also configured with a static route of 0.0.0.0 with a mask of 0.0.0.0. The router receives a packet addressed to network 10.1.0.0/16. What will the router do with the packet?
Forward the packet to the next hop router specified by the route to network 0.0.0.0
Which of the following routing protocols are classified as link state routing protocols?
OSPF
IS-IS
What information does the next hop entry in the routing table indentify?
The first router in the path to the destination network.
Which of the following are often synonymous with or made possible by CIDR?
Classless
VLSM
You have a router configured to share routing information using RIP. In addition, you have a single static route that identifies a default route for all other networks. The next hop router for the default route has changed. You need to make changes with the least amount of effort possible. What should you do?
Manually configure the default route to point to the next hop router.
Which of the following routing protocols is used by routers on the Internet for learning and sharing routes?
BGP
Which of the following statements about RIP is true?
RIP uses hop counts as the cost metric.
Which of the following best describes OSPF?
OSPF is a classless link-state routing protocol.
Which of the following routing protocols is classified as a balanced hybrid routing protocol?
EIGRP
Under which of the following circumstances might you implement BGP on your company network and share routes with Internet routers?
If the network is connected to the Internet using multiple ISPs.
You manage a server that uses an IP address of 192.168.255.188 with a mask of 255.255.0.0. Which of the following describes the address type?
Classless.