Upgrade to remove ads
ICND1 Practice Test
Terms in this set (26)
Which command verifies the Cisco IOS software version, ROM version, amount of memory, type of processor, number and types of interfaces, and the configuration register value on your router?
By default, no password is required to connect to the console port. Which 2 commands are required to enable local line authentication for the console port?
You are setting up remote access on your IOS switch. What is the purpose of the "login" command when issued in [line vty] configuration mode?
It prompts remote users to provide a password
What 2 things are required for a directly connected route to be added to the routing table?
1: configure an IP address on the interface
2: interface status & protocol must be up
What happens when you issue the "copy startup-config running-config" command on your IOS device?
the configuration in NVRAM merges with the configuration in RAM
Which of the following 3 statements are correct about VLANs?
1: the default VLAN is VLAN 1
2: all ports are a member of VLAN 1 by default
3: A VLAN must be configured on a switch before it can forward traffic for that VLAN
Which 2 statements correctly define VLANs?
1: VLANs can span many different Layer 2 switches
2: VLANs divide a single physical LAN into multiple logical LANs
What is the correct order for the DHCP process?
Discover, Offer, Request, Acknowledge
You need to apply an access-list to the vty lines on your router so that you can control which users can make telnet and ssh connections to the device. Which command in line vty configuration mode will apply the access-list to the vty lines?
access-class access-list-number in
Which of the commands will successfully create a named ACL called WEB_ACCESS that you can add permit and deny entries to for controlling access to web resources?
ip access-list extended WEB_ACCESS
Which command is used to verify the interfaces that are participating in the RIPv2 routing process?
show ip protocols
Which statement correctly defines an anycast IPv6 address?
Used in one-to-nearest communication
When the Cisco IOS image is located during boot, where is it loaded?
Which UTP cable category introduced 1Gbps throughput?
To add the model number of the local device you are connected to in the network diagram, which command provides you with the model number of the local Cisco IOS device?
Which show command verifies which interfaces have been enabled for port security and the security action that will be taken if a violation occurs?
How many subnets are created from a Class C addressing space that is using a /29 subnet mask?
What is the administrative distance of RIPv2?
Which command verifies the various file systems that are available on your Cisco IOS router?
show file systems
What are 2 results of subnetting a large Class A network?
1: Support more networks compared to original Class A network
2: Support fewer devices in each network compared to original Class A network
Which 4 features are used to extend the lifetime and usefulness of IPv4 networks?
1: Private addressing
Which command will assign a static global IPv6 address to an interface?
ipv6 address 2001::12:1/64
Which option is a valid representation of the IPv6 address 2001:0db8:010F:0001:0000:0000:0000:0ACD?
Which command is used to apply an ACL to an interface?
Which command is used to create a backup copy of your Cisco IOS image and store it in a TFTP server?
copy flash tftp
You have set up NAT on your edge router for private to public translations. Which 3 of the following can be verified with the show ip nat translations command?
YOU MIGHT ALSO LIKE...
ICND Practice Questions
CCNA Sec 210-260 Practice
Switches and Routers Exam
routers 2 part 2
OTHER SETS BY THIS CREATOR
Fun in the Sun
Compare/Contrast OSI & TCP/IP Models
Thomas & Friends
OTHER QUIZLET SETS
CCNA OCG Learn Set: Chapter 21 - Troubleshooting I…
TestOut PC Pro 6.9
Networking II Ch-1
Whale course 2 Final