Upgrade to remove ads
Terms in this set (19)
Open the bonnet, identify where you would check the engine oil level and tell me how you would check that engine has sufficient oil.
Identify dipstick, the oil level should be between min and max level, check when engine is cold.
Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has correct level.
Identify high/ low markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.
Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.
Identify reservoir, check level against high/low markings.
Identify where the windscreen washer reservoir is and tell me how you would check the windscreen and washer level.
Identify reservoir and explain how to check level.
Show me/ explain how you would check that the power assisted steering is working before starting a journey.
When the engine is off the steering is heavy, when engine is on the steering will be light, if not then steering is faulty.
Tell me how you would know if there was a problem with your anti lock braking system.
Warning light should illuminate.
Tell me how you would check that the brakes are working before starting a journey.
Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.
Show me how would check the parking brake (handbrake) for excessive wear, make sure you keep safe control of the vehicle.
Apply footbrake firmly. Demonstrate by applying parking brake so that when it is fully applied it secures itself, and is not at the end of the working travel.
Show me how you would check that the horn is working.
Check is carried out using control.
Show me how you would check that the direction indicators are working.
Applying the indicators or hazard warning switch and check function of all indicators. (Walk Around)
Show me how you would check that the brake lights are working on this car.
Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help.
Tell me how you would check that the headlights & tail lights are working.
Operate switch, then walk round vehicle.
Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.
Manufacturer's guide, use a reliable pressure gauge, check and adjust pressure when tyres are cold, do not forget to check the spare tyre and refit value caps.
Tell me how you would check the tyres to ensure that they have sufficient tread depth and their general condition is are for use on the road.
No cuts and bulges, 1.6mm of tread depth across the central 3/4 of the breadth of the tyre and around the entire outer circumference.
Show me how you would clean the windscreen using windscreen washer and wipers.
Pull lever on the right towards yourself.
Show me how you would set the demister controls to clear all the windows effectively, this should include both front and rear screens.
Press the back demister button, Move temperature to hot to demist the front.
Show me how would switch on the rear fog lights and explain when you would use them.
Operate switch. Check warning lights and explain when to use them
Show me how you will switch from dipped beam to main beam and explain how you would know the main beam is on whilst inside the car.
Operate switch, check with main beam warning light.
Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.
The head restraint should be adjusted so the rigid part is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable.
YOU MIGHT ALSO LIKE...
Show me Tell me Driving
fcuk pass ur driving test nat
Show me tell me 2017
Show Me Tell Me
OTHER SETS BY THIS CREATOR
Powerscore 700 GRE Words
Greg Matt Words
Crunch Prep Words