Upgrade to remove ads
Dr. II - First term study guide
living, sleeping, service, math, lines autoCAD
Terms in this set (48)
_ of the house is devoted to sleeping area
The _ normally determines the number of bedrooms a house will have.
size of the family
FHA recommended minimum size of bedroom
100 sq. ft
minimum closet depth
most desirable location of closet
near bedroom entrance
best location for a bedroom door is
near a corner
water closet and lavatory compromise a ___ bath
water closet, lavatory ,shower =
minimum size bath =
5' x 8'
___ space wide at least for a water closet.
bathtub size - most popular
another name for sink cabinets
a bath must have
____ receptacles are placed near water.
average size living room
250 sq. ft
small dining room seating 4 w/table and buffet
120 sq. ft
___ entry centrally located to provide easy access
a place to greet guests and remove overcoats
kitchen work triangle
most popular kitchen design
kitchen located along two adjacent walls.
L - shaped
work triangle consists of sink, range, ___
garage size for 2 cars
garage floor thickness
wall cabinet height
12" to 30"
wall cabinet depth
base cabinet depth
base cabinet height
base cabinet height w/ counter
lines used to show size and location
a method of making a drawing without instruments
section view taken about halfway up the wall
very light lines used to create drawing
standard drawing sheet 9"x12"
lines used to indicate features above the cutting plane
lines used to indicate center of holes, windows and doors
views in oorthographic proj are the front, right and ___ views
12 units to the foot
main storage device on a computer
crosshatch lines used to show the feature has been sectioned.
drawings in CAD are drawn at ___ scale
Most residential drawings are drawn at ___.
the ____ contains the processor, RAM and input/output devices
display device on computer is the ____.
computer-aided drafting and design.
CAD monitor should be at least _____ in size.
most common input device
where you would find collection of doors, windows
YOU MIGHT ALSO LIKE...
CM 1020 Chpt 2
Tech Test 2
Tech Ch 7-9 Test
Ch. 4 Drawing Instruments and Techniques
OTHER SETS BY THIS CREATOR
More 2015 CPAS Questions
2015 cpas extra terms
Dr. II - CPASS review Architecture
Dr. I CPASS Unit 11