20 terms

# Network+ Guide to Networks - sixth edition (chapter 9 review)

Network+ Guide to Networks - sixth edition (chapter 8 review)
###### PLAY
A node on a network has an IP address of 140.133.28.72 and its subnet mask is 255.248.0.0. What type of subnetting has been used on this network?
Supernetting
Defined: separates a network into multiple logical defined segments, or subnets.
What is the default subnet mask for a Class C network?
255.255.255.0
Convert the following subnet mask into its dotted-decimal equivalent: 11111111 11111111 11111000 00000000.
255.255.248.0
On a network with an IP address of 140.133.28.72 (or 10001100 10000101 0001110001001000) and a subnet mask of 255.248.0.0 (or 11111111 11111000 0000000000000000), what is the network ID?
140.128.0.0 (or 10001100 10000000 00000000 0000000)
As a networking consultant, you've been asked to help expand a client's TCP/IP network. The network administrator tells you that the network ID is subnetted as 185.27.54.0/26. On this network, how many bits of each IP address are devoted to host information?
6
You have decided to create 254 subnets on your Class B network. What subnet mask will you use to accomplish this?
255.255.255.0
If you subdivide your Class B network into 254 subnets, what is the maximum number of hosts you can assign to any single subnet?
254
If you worked on a network that could not interpret classless addressing, and your network ID was 145.27.0.0, what is the theoretical maximum number of different subnets you could create on this network?
254
Your company has leased a Class C network whose network ID is 205.61.128.0. You want to create 16 subnets within this network. One of the subnets will have an extended network prefix of 205.61.128.64. What will be the broadcast address for this subnet? (Hint: If you know the number of hosts per subnet, you can easily determine the broadcast address.)
205.61.128.79
Your workstation's IP address is 10.35.88.12, and your supervisor's workstation's IP address is 10.35.91.4. When you send data from your workstation to your supervisor's workstation, what is the most likely IP address of the first default gateway that will accept and interpret your transmission?
10.35.88.1
You have enabled NAT on your small office's router. The router's private network IP address is 198.162.6.1. Which of the following IP addresses is the most likely to be automatically assigned to one of the workstations that uses this router as its default gateway?
192.168.6.6
Which two of the following are benefits of using IMAP4 relative to POP3?
It allows users to review and delete mail without downloading it from the mail server.

It enables multiple users to easily share a central mailbox.
You have decided to use PAT on your small office network. At minimum, how many IP addresses must you obtain from your ISP in order for all five clients in your office to be able to access servers on the Internet?
1
What Network layer protocol does the traceroute utility use to obtain its information about paths between a source and destination?
ICMP
Which of the following commands allows you to view the routing table on your Linux workstation? (Choose all that apply.)
netstat -r

route
If you know that your colleague's TCP/IP host name is JSMITH, and you need to find out his IP address, which of the following commands should you type at your shell prompt or command prompt?
nslookup jsmith
Suppose your office's only DNS server was down, and you wanted to view the DNS address record for your company's domain. Which of the following TCP/IP utilities would allow you to do this?
dig ( Domain information grouper )

Defined: Dig allows you to query a DNS database and find the host name associated wit a specific IP adress or VISA VERSA
When you use the mtr command to assess the path from your office workstation to a server on your company's WAN that's located in Spain, what is the first hop the mtr command will display?