Terms in this set (32)
The type of drawing in which the three coordinate axes appear equal and the angles between
any two of them are 120 degrees
The type of drawing representing a three-dimensional object in two dimensions by drawing
separate views or faces of your 3D object.
The type of drawing representing the way that objects appear to get smaller and closer
together, the further away they are.
The type of drawing of which the frontal lines are given in true proportions and relations and
all others at suitable angles other than 90 degrees without regard to the rules of linear
Which drawing is an example of an oblique drawing?
Which drawing is an example of an isometric drawing?
Which drawing is an example of an perspective drawing?
Symmetrical means made up of exactly similar parts facing each other or around an axis.
Proportional means corresponding in size or amount to something else, ratio or scale.
Hidden lines in orthographic drawings are represented with solid lines.
When drawing orthographic drawings, the top view goes directly above the front view.
Orthographic drawings are also known as multi-view drawings.
fillet tool in Auto desk Inventor rounds edges and corners of objects
The mirror tool in Auto desk Inventor makes a copy of one or more features at equal distance
across a line or point.
What is the average number found in a set of numbers?
What is the number found in the middle of a group of number placed in order?
What is the value that occurs most frequently in a given set of data?
What is the difference between the larges and smallest numbers in a group of data?
What is a diagram consisting of rectangles whose area is proportional to the frequency of a
What is the quantity calculated to indicate the extent of variance for a group as a whole?
What is the first step (#1) in the engineering process?
What is the second step (#2) in the engineering process?
What is the third step (#3) in the engineering process?
What is the fourth step (#4) in the engineering process?
Construct and Test prototype
What is the fifth step (#5) in the engineering process?
What is the sixth step (#6) in the engineering process?
Which constraint causes selected linear geometry to lie parallel to each other?
Which constraint causes selected linear geometry to lie at a right angle to each other?
Which constraint causes 2 or more lines or ellipses to lie on the same line?
Which constraint constrains points to other geometry?
Which constraint selected circles and arcs to the same radius and selected lines to the same
Which constraint sets points and curves in position relative to the sketch coordinate system?