Only $2.99/month
Key Concepts:

Terms in this set (755)

1. Configure router or host name:

Router>enable
Router#configure terminal
Router(config)#hostname Apopka
Apopka#

2. Enable-secret password (cisco20):
Apopka#configure terminal
Apopka(config)#enable secret cisco20
3. Set the console password to RouterApass:

Apopka(config)#line console 0
Apopka(config-line)#password RouterApass
Apopka(config-line)#login
Apopka(config-line)#exit

4. Set the Telnet password to scan180:

Apopka(config)#linevty 0 4
Apopka(config-line)#password scan180
Apopka(config-line)#login
Apopka(config-line)#exit

5. Configure Ethernet interface (on the right) of router Apopka:

The subnet mask of the Ethernet network 209.165.200.0 is /27.
Therefore;
Network address: 209.165.200.0
Broadcast address: 209.165.200.31

Assignable host addresses = 209.165.200.1 - 209.165.200.30

The second assignable host address of this subnet is 209.165.200.2/27

Use the following command to assign the second assignable host address to Fa0/0 interface of Apopka router:

Apopka(config)#interfaceFa0/0
Apopka(config-if)#ipaddress 209.165.200.2 255.255.255.224
Apopka(config-if)#no shutdown
Apopka(config-if)#exit

6. Configure Serial interface (left) of router Apopka:
Serial0/0/0 IP 192.0.1.128/28:
Therefore;
Network address: 192.0.1.128
Broadcast address: 192.0.1.143

192.0.1.128 + 16 = 192.0.1.144

Assignable host addresses = 192.0.1.129 - 192.0.1.142

The last assignable host address of this subnet is 192.0.1.142

Use the following commands to assign the last assignable host address to interface s0/0/0 of Apopka router:

Apopka(config)#interface S0/0/0 (depending on the interface number)
Apopka(config-if)#ip address 192.0.1.142 255.255.255.240
Apopka(config-if)#no shutdown
Apopka(config-if)#exit

7. Configure RIP v2 routing protocol:

Apopka(config)#router rip
Apopka(config-router)#version 2
Apopka(config-router)#network 209.165.200.0
Apopka(config-router)#network 192.0.1.0
Apopka(config-router)#end
#copy running-config startup-config