16 terms

UAS Flex 105

STUDY
PLAY

Terms in this set (...)

Basic Maintenance
Actions necessary for retaining or restoring a piece of equipment, machine, or system to the specified operable condition to achieve its maximum useful life 105.01
Damage Control Plan
A plan that identifies situations or actions that present a safety hazard to people, equipment, data, or surroundings when performing troubleshooting procedures on a UAS 105.01
Intermittent
Starting, stopping, and starting again; not constant or steady 105.01
Troubleshooting
Trace and correct faults in a mechanical or electronic system 105.01
Digital Caliper
Used to precisely measure the distance between two opposite sides of an object 105.02
Hanging Scale
Used to measure weight and thrust 105.02
Heat Gun
A device used to emit a stream of hot air, usually at temperatures between 100 °C and 550 °C (200-1000 °F), which can be held by hand 105.02
Heat Shrink Tube
A shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical engineering 105.02
Nut Driver
A tool for tightening nuts and bolts. It essentially consists of a socket attached to a shaft and cylindrical handle and is similar in appearance and use to a screwdriver 105.02
Rotary Tool
A die grinder, also known as a rotary tool, is a handheld power tool used for grinding, sanding, honing, polishing, or machining material (typically metal, but also plastic or wood) 105.02
Ruler
Also called scale, is an instrument used in geometry, technical drawing, printing, engineering and building to measure distances or to rule straight lines 105.02
Screwdriver
A tool, manual or powered, for turning (driving or removing) screws. A typical simple screwdriver has a handle and a shaft, and a tip that the user inserts into the screw head to turn it. 105.02
Vise
A mechanical apparatus used to secure an object with two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever. 105.02
Electrical Short
An electrical circuit that allows a current to travel along an unintended path; can damage the circuit by overheating 105.03
Interference
A disturbance generated by an external source that affects an electrical circuit 105.03
Overload
Can be caused by motor drawing too much current causing controller to overheat 105.03