Upgrade to remove ads
Only $2.99/month

Fuel Systems

Terms in this set (12)

main, empty
When you see this display on the CAD the system is alerting you to the fact that your [______] tanks are [________].
[a] forward main tank

[b] aft main tank

[c] left supply tank

[d] right supply tank
Name the four fuel tanks in the UH-72

[a] main tank

[b] main tank

[c] supply tank

[d] supply tank
0
Before attempting an inflight restart, wait for the N1 to equal [_______]%.
flame out, engines
The FWD main tank is connected to the supply tanks by two overflows which are installed at different heights to achieve different volumes of the supply tanks to avoid simultaneous [____] of both [________].
aft main tank, forward main tank, supply tanks
The [_______] supplies fuel via the jet pump into the [______] , which supplies fuel via the transfer pumps into the [_______] for delivery to the engines.
unpressurized
The purpose of the Fuel Vent System is to keep the fuel tanks [________] under all operating conditions.
[a] 1530
[b] 1308
[c] 118
[d] 104
[e] 222
The total fuel capacity of the fuel tank systems is [a] pounds. The main tanks hold [b] pounds, the right supply tank (larger) holds [c] pounds and the left supply tank holds [d] pounds. The total fuel quantity in the two supply tanks will always be [e] pounds until the fuel in the main tanks is exhausted.
engine start
The Fuel Prime Pumps are used during ______________.
4
There are __________ fuel tanks in the UH-72 located beneath the cabin floor. (give quantity)
static dissipation additive
corrosion inhibitor/lubricant
fuel system icing inhibitor
What are the three additives that are blended into the military's JP8 fuel?
first flight
A fuel sample should be taken prior to the [______] of the day.
[a] supply
[b] main
The prime pumps are located in the [a] tanks while the transfer pumps are located in the [b] tanks
THIS SET IS OFTEN IN FOLDERS WITH...