Upgrade to remove ads
NACT2 - Wall and Ceiling Framing
Terms in this set (14)
A wood block used as a filler piece and a support between framing members.
In wall framing, a short framing stud that fills the space between a header and a top plate or between the sill and the soleplate.
Narrow wood strips nailed to a wall or ceiling as a nailing base for finish material.
A horizontal structural member that supports the load over a window or door.
The top and side member of a door or window frame that come into contact with the door or window.
A 1 x 4 nailed to the ceiling joists at the center of the span to prevent twisting and bowing of the joints.
rough window sill
The lower framming member attached to the top of the lower cripple studs to form the base of a rough opening for a window.
An L-shaped arrangement of lumber used to support ceiling joists and keep them in alignment.
double top plate
The upper horizontal framing member of a wall used to carry the weight of roof trusses or rafters and provides extra stiffening of a wall.
A vertical framing member that forms the sides of rough openings for doors and windows.
this is usually the stud running from the top to the bottom plate on either side of a window or door.
an opening in the framing formed by framing members, usually a window or door.
wall that divides space within a building.
the lowest horizontal member of a wall or partition to which the studs are nailed.
THIS SET IS OFTEN IN FOLDERS WITH...
NACT2 - Orientation to Trade
NACT2 - Stairs
Carpentry - Roof Framing
wall and ceiling framing
YOU MIGHT ALSO LIKE...
Wall and Ceiling Framing
Unit 15 - Wall, Ceiling & Roof Framing
Wall & Ceiling Framing Trade Terms
OTHER SETS BY THIS CREATOR
NACT1-Basic Communication Skills
NACT1 - Paints, Stains and Caulks
NACT1 - Cabinet Making
NACT1 - Plumbing Tools