Upgrade to remove ads
(17/20) MTA 98-366 Networking Fundamentals
Breaking down the Mega sets: This is number 1 of 3 combined sets of all the study sets on "MTA 98-366 Networking Fundamentals" that I was able to find here. Many thanks to all the editors of the existing sets! (DITTO!x100!)
Terms in this set (40)
You are troubleshooting a computer that cannot obtain the proper Ip address from a DHCP server. When you run ipconfig, the address 22.214.171.124 shows up in the results. What service is assigning the IP address to the client?
You have just scanned the ports of your server and see that port 3389 is open. What can you deduce from this?
Terminal Services Is Running
Your boss asks you to take control of a server remotely from within the Graphical User Interface (GUI) of the client OS. What is the proper tool to use?
You have been asked by a client to install a VPN server. Which of the following services shouldl be chosen in order to accomplish this?
Routing and Remote Access Service (RRAS)
Which generates encryption and authentication keys that are used by IPsec?
Security Association (SA)
The ________ service resolves host names to IP addresses.
Domain Name System (DNS)
Windows Internet Name Service (WINS)
The __________ service resolves NetBIOS names to IP addresses.
The __________ step in the DORA four-step process is when a client broadcasts out to the network in order to find a DHCP server.
When renewing a DHCP assigned IP address, usually the __________ steps of the DORA process are involved.
Request & Acknowledge
To install the DHCP service on a Windows Server 2008 computer, you would use the _________ section of the Server Manager.
By default, wired DHCP leases last for ________ days.
The ___________ and ____________ commands are useful when troubleshooting a client that is having difficulty obtaining an IP address from a DHCP server.
Ipconfig /release & Ipconfig /renew
A client that has obtained an Ip address of 169.254.10.175 is getting the IP address from ___________.
____________ enables clients to connect to and take control of a server.
What protocol automatically configures IP configuration for a client?
Dynamic Host Configuration Protocol (DHCP)
What ports does DHCP use?
Port 67 & 68
After you install DHCP servers and configure and activate a sope, what is the last step in installing a DHCP server?
Authorize the server
You have a computer with an address of 126.96.36.199 and a subnet mask of 255.255.0.0, yet you cannot connect to your local file servers. What is most likely the problem?
It cannot communicate with a DHCP server
What name does Windows Server 2008 R2 use for Terminal Service?
Remote Desktop Services
What port does Remote Desktop Services use?
What would you use to creat VPN tunnels so that users can connect to your internal network while at home using Windows Server 2008 R2?
What protocol is used with L2TP to encrypt data?
Which component of IPSec generates the encryption and authentication keys?
Security Association (SA)
Which IPsec component provides connectionless intergrity and data authentication but does not provide confidentiality?
Authentication Header (AH)
Which IPSec component includes the most security, including confidentiality?
Encapsulating Security Payload (ESP)
What port does DNS use?
What is Microsoft's version of a command line interface or CLI?
Running the command prompt as an administrator is also known as running it in _____________.
This displays the help file for ipconfig.
Type the command __________ to retrieve an IP address and other IP configurations.
Command used to test the existence of other hosts on the network?
To find out the host name of a computer, type either the command __________ or the command __________.
Hostname / Ipconfig
This command option sends pings endlessly to a destination IP address.
Ping -t [IP address]
The ping -t command can only be stopped by pressing this key combination on the keyboard.
Ctrl + C
This displays TCP and UDP connections.
netstat -a (command)
This displays TCP and UDP connections in numeric format.
netstat -an (command)
This displays Ethernet statistics such as the number of packets and bytes sent and received.
netstat -e (command)
This displays the route table.
netstat -r (command)
This displays statistics per protocol, such as TCP, UDP, ICMP, IP, etc...
netstat -s (command)
This displays NetBIOS over TCP/IP statistics for local and remote computers.
THIS SET IS OFTEN IN FOLDERS WITH...
(18/20) MTA 98-366 Networking Fundamentals
(2/20) MTA 98-366 Networking Fundamentals
(6/20) MTA 98-366 Networking Fundamentals
(10/20) MTA 98-366 Networking Fundamentals
YOU MIGHT ALSO LIKE...
Lesson 6: Working With Networking Services
MTA Networking - Chapter 6 Review Questions
Lesson 6 Test Review - Working with Network Servic…
OTHER SETS BY THIS CREATOR
Recovery Console Commands
CVV1 - DB Fund. Ammended (edits in progress)