Upgrade to remove ads
Carpentry - Fasteners
Terms in this set (38)
A device used to fasten structural members in place.
A thin nails with a head, usually coated with a material to increase its holding power.
A thin, short finishing nail.
Term used to describe uncoated nails.
A machine-threaded bolt having a rounded head and no screw slot.
Fasteners used for rough work such as framing.
Multipurpose slot-headed fastener.
Hollow wall fastener with deep threads used as a holder for screws.
Term used to describe a large metal fastener used to join framing members.
An adhesive used to bond plastic laminates of other thin material; so called because the bond is made on contact, eliminating the need for clamps.
A solid wall fastener that is set with a hammer.
A solid wall fastener that requires a setting tool used to support bolt threads.
A double-headed nail used for temporary fastening such as in the construction of wood scaffolds.
The decomposition of the softer of two unlike metals in contact with each other in the presence of water.
Hollow wall fastener that spreads out behind the dry-wall to secure screws.
A thin nail with a small head designed for setting below the surface of finish material.
Lead and plastic anchors commonly used for fastening lightweight fixtures to masonry walls.
Protect from rusting by a coating of zinc.
Large threaded screw with hex head.
Anchor used to secure lags in solid walls.
Hex-headed threaded fastener typically used with a nut and washer.
Hardened steel fasteners used in cementitious materials.
A thick adhesive.
Used for a number of hollow-wall and some solid-wall applications.
A term used in designating nail sizes.
A type of screw head with a cross-slot.
Hollow wall anchor used to secure screws.
Large-headed galvanized fastener used to attach roofing material.
Screws designed to drill a pilot hole as it is turned.
Solid wall fastener used to secure bolts.
Solid wall anchor
Metal fasteners that tighten inside a hole as a bolt or screw is turned.
Split fast anchor
Fastener that tightens in a masonry hole by the opposing pressure of shaft legs.
U-shaped fastener used to secure a variety of materials.
Bolt with a machine thread and a screw-slot head.
Hollow wall anchor with spring-loaded wings to secure a machine-threaded bolt.
A high-performance glue that is strong, flexible, durable and is used for exterior applications.
Fastener used to secure bolts in solid walls.
General term for most nails that are made from coils of wire.
THIS SET IS OFTEN IN FOLDERS WITH...
Carpentry - Stair Framing
Woodworking Tool ID
Carpentry - Insulation and Ventilation
YOU MIGHT ALSO LIKE...
Construction I Final Exam: Chapter 7-10
Brannigan's Chapter 9 Ordinary Construction
CDAE 131 chapter 14,19
Interior Materials & Applications: Paint
OTHER SETS BY THIS CREATOR
Carpentry - Roof Framing
Carpentry - Scaffolds, Ladders, and Horses
Carpentry - Interior Rough Work
Carpentry - Exterior Wall Framing