Home
Subjects
Textbook solutions
Create
Study sets, textbooks, questions
Log in
Sign up
Upgrade to remove ads
Only $35.99/year
American Chemical Society Laboratory Safety Quiz
STUDY
Flashcards
Learn
Write
Spell
Test
PLAY
Match
Gravity
Terms in this set (120)
All of the above (federal, county, local, and state)
What elected group's laws and regulations make laboratory safety a legal requirement in the United States of America?
All of the above (safety training should be an integral part of the daily activities of lab workers, safety training must be a continuing process, formal safety education should be made as relevant as possible to actual work activities, informal safety training through collegial interactions are valuable ways to exchange safety info, and sustain an atmosphere in which colleagues reinforce each other's good work habits)
Which of the following describes some key elements of an appropriate safety training program?
All of the above (practice the habit of accident prevention, use personal protective equipment, when possible substitute a less hazardous chemical for a more hazardous one--anticipate the possible consequences of the work you do, use the smallest quantity of material necessary
To reduce the probability of accidents:
contact lenses
Examples of personal protective equipment do NOT include:
All of the above (regular safety inspections, regular monitoring, procedures that ensure proper disposal of waste chemicals, formal and regular procedures)
An accident-prevention program must include:
once a month
Regular inspection of safety equipment such as eye washes and safety showers must be carried out:
Storing less material on-site
Pollution prevention is an integral component of waste management practices. Which of the following is not included in the hierarchy of pollution prevention techniques?
a shared responsibility
Safety in the instructional laboratory is:
Everyone
Who is required to wear eye protection in the laboratory?
All of the above (Failure to use common sense, failure to follow instructions, making mistakes, an indifferent attitude)
Accidents often result from:
All of the above (Follow all safety instructions carefully, never play tricks or indulge in horseplay in the chemical laboratory, become familiar with the hazards of the chemicals to be used, become familiar with the hazards of equipment to be used, know where the safety equipment is)
General guidelines for preventing accidents include:
False
True or False. Safety regulations require that contact lenses NOT be worn in the laboratory:
When working under reduced pressure
When must special "blast shields" be utilized?
All of the above (Offer protection from splashes and spills, be at least fire-resistant, be easily removable in case of accident)
Clothing worn in the lab should:
Chemicals can be trapped under it, in contact with sensitive skin
Jewelry is a potential safety issue because:
Sets with similar terms
intro to lab safety
29 terms
Unit 01: Science Safety and Procedures Vocabulary
20 terms
Clinical Chemistry, Laboratory safety
79 terms
Lab safety quiz
50 terms
Sets found in the same folder
ACS Safety Exam Chapter 1
48 terms
Chem023: Lab Safety Quiz
75 terms
SL 182 Midterm Practical: Safety
65 terms
chapter 11 study questions
16 terms
Other sets by this creator
Training and Development in Healthcare Organizatio…
86 terms
BIO 112 - Possible SA Midterm Questions
40 terms
Verified questions
ENGINEERING
A three-phase source delivers 4.8 kVA to a wye-connected load with a phase voltage of 208 V and a power factor of 0.9 lagging. Calculate the source line current and the source line voltage.
ENGINEERING
A spherical aluminum shell of inside diameter D=2m is evacuated and is used as a radiation test chamber. If the inner surface is coated with carbon black and maintained at 600 K, what is the irradiation on a small test surface placed in the chamber? If the inner surface were not coated and maintained at 600 K, what would the irradiation be?
ENGINEERING
Using the Clapeyron equation, estimate the enthalpy of vaporization of refrigerant-134a at $40^{\circ} \mathrm{C},$ and compare it to the tabulated value.
ENGINEERING
Carbon dioxide enters an adiabatic compressor at 100 kPa and 300 K at a rate of 0.5 kg/s and leaves at 600 kPa and 450 K. Neglecting kinetic energy changes, determine (a) the volume flow rate of the carbon dioxide at the compressor inlet and (b) the power input to the compressor. Amswers: (a) 0.283 m^3/s, (b) 68.8 kW
Other Quizlet sets
Beef Sci Final True/False and Grazing Areas
39 terms
Ch. 21 microbial diseases of the skin and eyes (ex…
61 terms
Chapter 8 photosynthesis
19 terms
Bio Honors Finals Essays
11 terms
Related questions
QUESTION
The concept of a critical stress for crack propagation is applicable to both brittle and ductile materials.
QUESTION
An ordered aggregate of surfactant molecules formed when the surfactant concentration in a solution reaches a critical point, thus lowering the free energy of the system.
QUESTION
In tensile testing a single fiber, the device that measures the load is called? What might be a reasonable full-scale capacity for this device (N) for most fibers?
QUESTION
The reservoir pressure measured in a discovery well, usually referred to as pi. This value is necessary for many reservoir engineering calculations, such as reserve determination.