Upgrade to remove ads
Only $35.99/year

Air Quality

Terms in this set (12)

Sterile Compounding:
Primary engineering control (PEC), the hood or isolator where compounded sterile products are made, must be at least ISO ____.
5
Sterile Compounding:
Buffer area (air in the room around PEC) must be at least ISO ____.
7
Sterile Compounding:
Ante area (adjacent to buffer area, where hand washing/garbing is done) must be at least ISO ____ if it opens into positive pressure buffer area.
8
Sterile Compounding or Hazardous drug preparation :
Ante area (adjacent to buffer area, where hand washing/garbing is done) must be at least ISO ____ if it opens into negative pressure buffer area.
7
Sterile Compounding:
CSPs (compounded sterile products) can be prepared in a PEC located in a buffer area and an ante area with at least _____ air changes per hour
30
Non-Sterile HD Compounding:
the air in the C-SEC requires at least _____ ACPH (air changes per hour).
12
The hoods do not need to be located in ISO clean room, and can be placed in a room with unclassified air but the PEC must be vented (preferred) or cleaned by redundant HEPA filters, in series.
Non-sterile HD compounding
Sterile HD Compounding:
the C-PEC has ISO ____ air
5
Sterile HD Compounding:
the C-SEC (ante-area and buffer area) has ISO ____ air
7
Sterile HD Compounding:
the air in the buffer room and ante-room requires at least ____ ACPH (air changes per hour).
30
Sterile HD Compounding:
the air in the segregated compounding area requires at least ____ ACPH (air changes per hour).
12
In Non-sterile and Sterile HD compounding:
All _____ must be negative pressure to keep the air in the HD area from escaping into other areas.
C-SECs
Sets with similar terms