Upgrade to remove ads
Terms in this set (173)
SRS limits the quantity of any item in the PEB to a how many-day supply?
There are two types of part numbers; what are they?
Definitive and nondefinitive
Which type of alloy are shunt strips usually made of?
What begins at the extreme left-hand position of a number and continues from the left to the right, one position at a time, until all digits have been considered?
The ICRL-A is in microfiche and is revised how often?
Supply reviews stock records for the PEB how often?
What lists the items that are exempt from the mandatory one-for-one turn in?
What position in the SM&R code indicates the recoverability code?
What is a permanent part of the aircraft logbook for equipments installed at the time of aircraft transfer?
Which year was the Electronic Test Equipment Classification Board established to control the increased use of undesirable electronic test equipment in fleet and shore activities?
Most requirements for components from organizational maintenance are for items carried in the what?
There are how many workload priorities that can be assigned to a LRCA?
I-level maintenance activities repair more than what percent of the unserviceable parts turned in by the squadrons?
Which type of instrument allows you to view rotating or reciprocating objects intermittently and produces the optical effect of a slowing down and stopping motion?
Do not use corrosion preventative compounds on engine parts or accessories which exceed which temperature?
Which system is used by all branches of the military to identify equipment by a system of standardized nomenclatures?
What contains high usage, low cost, maintenance related materials, such as nuts, bolts, gaskets, O-rings, switches, abrasive, and glues?
Which program is a partnership in which the Navy seeks to reduce supply support costs by improving reliability and maintainability of NAVSUP WSS managed items in fielded weapon or support systems?
The use of solvents for cleaning operations is dependent upon which type of stringent regulations?
Environmental and safety
The function of the what is to manage the LRCA held at the ASD/SSC?
Which type of drill motors are the preferred power tools for removing heavy corrosion or reworking large surface areas?
What processes components turned in to the ASD/SSC (aviation support division/supply support center) to determine the capability of the intermediate maintenance activity (IMA) to check/test or repair the item?
What squadron division performs inspections in the areas of power plants, airframes, and aircrew personnel protective/survival equipment?
The IMRL has how many major sections?
Older type power meters use thermistor power sensors. The frequency ranges of these sensors are from 10 MHz to what, depending on the model of sensor used?
Which command manages general purpose electronic test equipment?
What is responsible for managing a program of research, development, training, and application of Non- Destructive Inspection (NDI) techniques and equipment?
The Maintenance Data System (MDS) will be subject to frequent changes, especially in the area of validation. The Central Design Activity (CDA) should maintain the capability of responding to changes of this nature within a maximum of how many days from implementation notification?
SERMIS is the repository of master data for printing what?
What is the title of an overall program that provides the data required for effective management of SE at all levels of aircraft maintenance?
What identify material requirements and provide a basis for SE procurement?
What represent the SECA within their geographical areas of responsibility?
What gives maintenance/aircrew personnel an accurate, comprehensive, and chronological record of flights and maintenance performed on a specific aircraft by bureau number (BUNO) for at least the last 10 flights?
What position in the SM&R code identifies either the restrictions on acquiring the item or the level of maintenance required to manufacture or assemble the item?
What lets intermediate maintenance activity (IMA) personnel determine if they can repair an individual item based on its SM&R code?
Who maintains the SERMIS file by establishing and maintaining a SERMIS application guide, which includes SERMIS codes, avionics system number, and standard allowance symbols?
Which data warehouse and reporting system sources flight, maintenance and engine management data to provide standardized reporting, On- Line Analytical Processing Cubes, and Ad Hoc query access?
Conditional inspection documents should be maintained in the Aircraft Inspection File for how many months from the date of completion?
Which labels or tags are used when some unusual or special condition in the calibration should be drawn to your attention and have black letters on a yellow background?
What in the aircraft logbook is generated by the squadron and is used to monitor structural life limited components designated for depot replacement that do not require scheduled removal component (SRC) or assembly service record (ASR) documentation?
What shows and lists procurable assemblies and detail parts so you can quickly identify assemblies and their components?
What should not be used to remove corrosion from installed fasteners?
What is a five-digit number the federal government assigns to activities, such as manufacturer, vendor, or government agencies?
Which publication establishes policies for the operation and management of afloat supply departments and shore- based units of the fleet operating forces operating under afloat procedures?
NAVSUP P-485 Volume I
For aircraft not having preservation maintenance technical manuals, preservation shall be performed per which publication?
What positions of the SM&R codes identify maintenance-level codes?
3rd & 4th
Which program establishes the minimum requirements for sampling fuel in naval aircraft and aircraft engine test cells?
Component repair of engines included in the COMNAVAIRSYSCOM Nonavionic CSE QECA Program will be performed per what instruction?
Which publication provides uniform DOD policy and procedural guidance for aircraft ground and flight operations and the maintenance of any aircraft or associated equipment?
What lists those items of Navy-managed repairable items issued on a one-for-one basis (you must turn in the unserviceable item before you can draw a replacement item from supply)?
Which part of a supply department is the point of contact for maintenance activities requiring direct support?
What section of the aircraft logbook contains a record of all explosive devices installed in the aircraft and/or major assemblies?
What supports the Chief of Naval Operations and the Commandant of the Marine Corps objectives for aviation readiness, safety, and the optimum use of manpower, facilities, materials, and funds?
What are major aviation commands that exercise administrative control of AMMRL program SE end items for allowance and inventory control?
Material Control codes D, E, G, H, Q, or what else identify mandatory turn in repairables that must be turned in to the local supply department when the become unserviceable?
What contains a complete record of all repair, reconditioning, scheduled depot level maintenance, conversion, modification, modernization, and aircraft service period adjustment inspections performed on the aircraft?
Which condition exists when the insertion of a meter into a circuit changes the operation of that circuit?
The AVCAL is comprised of how many basic parts?
What inspections are conducted between flights to ensure the integrity of the aircraft for flight, verify proper servicing, and to detect degradation that may have occurred during the previous flight?
What inspection is a scheduled inspection with a prescribed interval other than daily or phase?
Which label has green lettering and a white background and is used in the event that an individual instrument due for recalibration will not be used for sometime in the future?
Inactive-calibrate before use
Two NAVAIR instructions describe the procedures for allowance and inventory control, NAVAIRINST 13650.1 for IMRL items and what for TOL items?
What form provides a means of recording all scheduled and conditional inspections performed on an aircraft during each period and on equipment for which an AESR is required?
How often are materials and services allocated by the CNO and CMC to support the NAMP?
It is the responsibility of the aircraft maintenance officer or his designated representative, usually the maintenance chief, to release the aircraft by signing what form?
Which type of corrosion often occurs at antenna attachment points?
What lists the items and quantities of aeronautical material authorized to be stocked by an aircraft carrier to support the maintenance and operations of embarked aircraft?
What are highly susceptible to corrosion because of dissimilar metal contact that results from wear and damage of protective metallic coatings?
What part numbers cannot be directly related to an applicable NSN without the use of additional information?
What rating performs preflight, postflight, and other periodic aircraft inspections?
Which type of analyzer is a device used to display the spectrum of modulated waves in the radio frequency range and in the microwave frequency?
What provides the support equipment controlling authority with online visibility of source, allowance, inventory, and rework data to aid in inventory control?
High strength steels used in landing gear and launch/recovery systems are sensitive to pitting and which type of cracking, which can lead to catastrophic failure?
If the standing wave ratio is greater than what, the the transmission line efficiency has decreased and troubleshooting is necessary?
1.5 to 1
What has the objective of maintaining the required level of stock availability while minimizing the risk of shelf life expiration prior to use?
Which flammable solvent is used as a disinfectant, and for removing fungus and mold from aircraft surfaces?
Which wire prevents an electrical shock to the operator in case there is an electrical short to the frame or the appliance or tool?
Thermocouple sensors are available for frequencies from 100kHz to what depending on the model of sensor used?
Which publication contains Navy Training System Plans development, approval, and implementation procedures?
What are used primarily for the initial removal of heavy corrosion deposits in corners and crevices that cannot be reached with other equipment?
Which devices compares an unknown voltage with a known internal reference voltage and to indicate the difference in their values?
MIL-T-81772 may be used at locations requiring a solvent vapor pressure less than or equal to how many mm Hg?
Transistors are easily damaged by high current; therefore, resistance measurements must not be taken with an ohmmeter that provides a maximum current output in excess of what?
Which two main categories is the maintenance of electrical and electronic equipment divided into?
Preventive and Corrective
Which type of lubricants are often applied to hinge pins and nodes to provide lubrication and to reduce corrosion problems?
Corrosion inhibiting solid film
Which series addresses maintenance policies, procedures, and responsibilities for the conduct of the Naval Aviation Maintenance Program (NAMP) at all levels of maintenance throughout naval aviation?
When you are using ammeters, a primary rule of safety is that such current-measuring instruments must always be connected what way with a circuit?
Which concept was the Gas Turbine Engine Maintenance program issued under?
In operations requiring taxiing of aircraft, directors are usually stationed at intervals of how many feet along the flight deck?
50 to 100
Which program is the primary training database for Navy and Marine Corps O-level and I-level maintenance activities?
When deployed within three miles of salt water or when flown below how many feet of salt water, daily cleaning or wipe down is required on all exposed, unpainted surfaces, such as landing gear struts and actuating rods of hydraulic cylinders?
The Aircraft Discrepancy Book is designed to provide maintenance and aircrew personnel with an accurate, comprehensive, and chronological record of flights and maintenance performed on a specific aircraft by bureau number for at least how many flights?
What produces signals that include the audio range and extend into the rf range?
Video signal generators
What is the angle the outgoing electron beam makes with the CRT center line axis between the plates called?
Angle of deflection
What is recommended for cleaning wheel wells and wing butts, and replaces solvent cleaning where water rinsing can be tolerated?
MIL-PRF-85570 Type V
What is a mildew remover developed by NAVAIR for cleaning mildew, mold, and fungus from aircraft surfaces?
What color vest would the cargo handling personnel wear during flight quarters?
Which publication implements aviation requirements and shall be used as the governing document for all Aircraft Confined Space Program procedures, ashore and afloat?
The standard frequency used in electronic counters is an internal crystal oscillator that generates and standard frequency of 1, 5, or how many MHz?
The differential voltmeter is a solid-state instrument that provides the capability of making dc voltage measurements from +/- 10 microvolts to +/- how many volts?
Which type of electronic flash device is the flash duration is very short (a few millionths of a second)?
Which publication contains Source, Maintenance, and Recoverability policies, procedures, and responsibilities?
Which type of inspection provides the best resolution for detection of surface and subsurface corrosion flaws when no other method can accomplish the inspection?
What is the recommended cleaning agent for use in high pressure cabinet-style parts washers to remove oils and greases from disassembled components?
Use only the radial bristle disc, flap brush and wheel, or what else to remove corrosion on high strength steel parts?
What is a representation of both the detail and the entire assembly?
What is commonly used for the analysis of waveforms generated by electronic equipment?
Which section is considered to be the heart of the Tracker 2000?
Paint removal by which method shall not go beyond the primer coat unless repair is required?
Which publication are maintenance functions, policies, and responsibilities for armament equipment listed in?
Only Support Equipment authorized per which publication will be used to dispense hydraulic fluid?
What is the examination of supplies and services, including raw material, documents, data, components, and assemblies?
The Navy uses two types of electronic counters-the conventional counter and which other type of counter?
Which type of diagram is used to trace the circuit and its functions without regard to the actual physical size, shape, or location of the component devices or parts?
What inspections are specific QA functions that are required during the performance of maintenance requirements and actions when satisfactory task performance cannot be determined after the task has been completed?
Which form used in the logbook and AESR, provides a record of all scheduled and conditional inspections performed on the aircraft during each period and on equipment for which AESR is required?
Which program is the restoration or replacement of primary aircraft structures that have reached fatigue life limits?
Service Life Extension Program (SLEP)
Maintenance activities submit IMRL revision requests following the procedures outlined in what instruction?
Resistance is measured in?
During scheduled or unscheduled maintenance actions on aviation equipment or components, the area involved as well as those within how many inches of the repair or treatment area shall be visibly inspected for corrosion?
Which publication contains instructions for using the material priority system and assigning Force Activity Designators?
What is a multi-phased (Prototype to Implementation) program maintenance philosophy based on Reliability Centered Maintenance analysis and focused on developing proactive Preventative Maintenance Plans?
Most transmitting devices and signal sources contain what?
What is Phased Depot Maintenance categorized as which scheduled D-level maintenance performed per an established recurring schedule?
Which label has black lettering on a white background that comes in two sizes and is usually and is the most commonly used label in the METCAL program?
What allows you to view two independent signal sources as a dual display on a single CRT?
What are the two common types of portable tachometers?
Centrifugal and Chronometric
Meggers are used to test what whose peak voltages are not below the output of the megger?
What are the most common voltmeters used in the Navy today?
What representative manages the AMMRL program with his/her geographical areas?
Which publication contain detailed information about establishing and operating a CTPL?
Which form is used in the logbook and the AESR to record significant information affecting the aircraft for which no other space is provided in the logbook?
What is the speed limit for operating vehicles on airfields and in the vicinity of aircraft and hangars?
Who has final disposition authority of NAMP change recommendations?
Which program was established to permit achievement of required item performance, operational efficiency, logistic support, and readiness through effective management of item configuration requirements?
The NSN is a how many digit number that identifies an item of material in the supply system?
The ship shall stop MDS reporting how many months prior to its decommissioning date?
Tube failures account for over what percent of the failures in electron-tube equipments?
What is the speed limit for operating vehicles on runways, taxiways, parking areas, ramps, and work areas?
Which type of parts are particularly susceptible to corrosion attack when exposed to salt water or fire extinguishing materials?
Which publication specifies what activities are authorized to repair specific model aircraft engines and what level of repair they are authorized to perform?
Which type of circuit offers a low impedance to currents of the particular frequency to which the circuit is tuned and a relatively high impedance to currents of all other frequencies?
High strength steels (typically how many ksi and above), some high strength aluminums, and some stainless steels can develop a condition known as hydrogen embrittlement when exposed to some highly alkaline materials, such as unauthorized cleaners?
What is the most common aircraft wheel chicks used by the Navy particularly aboard aircraft carriers?
NWC-4/5 polyurethane universal
Which performance improvement element as applied to the NAMP is defined as the degree of being free from defects, deficiencies, and variations?
There are various resistance ratings of meggers with full scale values that measure resistance as low as 5 megohms to as high as how many megohms?
Electronic equipment can be divided into how many types?
What produces a constant amplitude, low distortion sine wave test signal?
Which program provides policy and assigns responsibilities to ensure continuing structural safety of fixed and rotary wing aircraft throughout their assigned service life?
Structural Life Limits
What provides cross reference information from a reference number to its NSN?
What directs the requirements and responsibilities for managing the technical data held by maintenance activities of all levels?
Technicians often prefer what type of oscilloscope when it is important to display rapidly varying signals in "real time"?
When voltmeters are used, a primary rule of safety is that such voltage measuring instruments must always be connected in which way with a circuit?
Which publication is the guiding instruction for creating, approving, and issuing TDs?
How many separate but interrelate subsystems are embraced by the MDS?
Many types of rubber are subject to what which can cause deterioration of the rubber and corrosion of surrounding metal surfaces?
Which solvent is used as a cleaner and degreaser for painted and unpainted metal parts?
Maintenance control assigns a priority to individual material requisitions according to the military importance and the urgency of need of the item. Most fleet operational activities have what assigned?
FAD II or III
What is the designated Management Information System for the METCAL program?
All test equipment and calibration standards used for what measurements must be calibrated?
Who has the responsibility to keep the crew thoroughly informed about safety precautions for handling aircraft?
Which publication provides the standardized policy and procedures for ALIMS operations?
Corrosion can be prevented by spraying which type of corrosion prevention compound into the pin and/or pin receptacle end of connectors prior to mating the connector halves and on the connector shells after mating the connector halves?
MIL-PRF-81309 Type III
Which performance improvement element as applied to the NAMP is defined as application of information, creativity, and initiative to improve something?
What is a quick go/no-go resistance test that distinguishes between and open and a closed circuit?
Which system furnishes data products that provide management tools for the efficient and economical management of maintenance organizations?
What inspection is a general inspection of a specific area of an aircraft?
The QA inspector who actually performs the inspection of the standards of the work signs the "INSPECTED BY" block on all what?
What is the type of tow bar is the most commonly used by the Navy today?
The primary use of what is in troubleshooting and aligning electronic equipment?
Electronic counters can accurately measure frequencies to what?
Which type of wire brushes are not authorized for corrosion removal on soft metals, such as aluminum and magnesium unless authorized by the cognizant aircraft engineering authority?
Which publication contains information concerning Force Activity Designators, issue priority designators, requisition processing, delivery dating, and mission essential material, abuses and policing of the priority system, and expedited handling of critically needed items?
You might also like...
CDC, Materiel Management, Volume 2, URE
Advancement Exam Study Guide - AT E6 - AMR Ch 1
CDC, Materiel Management Volume 2,STQ
COMNAVAIRFORINST 4790.2C, THE NAVAL AVIATION MAINT…
Other sets by this creator
Other Quizlet sets
Ch 28: Beverages
Pathology Semester Review
BUSINESS LAW FINAL