Gas Metal Arc Welding On-Line Quiz
Terms in this set (19)
The abbreviation "G.M.A.W.' stands for:
Gas Metal Arc Welding
The welding current most efficient for
Direct Current electrode positive
The distance from the contact tip to the work is called:
Shielding gas does all the following except:
Preheat the weld
shield the weld
stabilize the arc
Preheat the weld
What shielding gas is used in the short-arc welding of most mild steel?
The amperage on a GMAW welding machine is controlled by its:
Wire feed setting
The wire used for GMAW must match the:
The difference in flux core and hard wire GMAW is:
Wire (gmaw solid/fcaw flux cored)
Gas Metal Arc Welding is a form of:
If the wire speed is increased, the voltage must be
With lower welding amperage and less heat, the weld beads are:
Spray transfer, globular transfer, and pulse transfer are:
GMAW modes of metal transfer
Shielding gases are used to displace the________from the weld zone to prevent contamination from the weld puddle.
GMAW generates intense heat, what is the temperature of the arc?
as the electrode extension increases, preheating of the wire_______resulting in________penetration
This is required for measuring shielding gas in the GMAW process
GMAW is an arc welding process that uses________for the filler metal.
The most common wire diameters used in GMAW are?
Improper shielding gas coverage can result in?
YOU MIGHT ALSO LIKE...
Chapter 15: GMAW and FCAW: Equipment and Supplies
Dr. Muller Advanced Welding GMAW -
OTHER SETS BY THIS CREATOR
Shielded Metal Arc Welding Quiz 1
Basic Math Test
Welding Inspection and Testing On-Line
THIS SET IS OFTEN IN FOLDERS WITH...
GMAW - Welding Test
Flux Cored Arc Welding On-Line Quiz
Gas Metal Arc Welding: Equipment, Set-Up and Maintenance