Study sets, textbooks, questions
Upgrade to remove ads
Terms in this set (10)
The process for making the fire pump operational begins:
after the apparatus has been properly positioned and the parking brake has been set.
On the majority of apparatus, the procedure for making the pump operational takes place:
before the driver/operator exits the cab.
How are dry pipe systems supplied with water?
A pumper that attaches to a standpipe FDC outside the building
The process of making the fire pump operational may also be called:
putting the pump into gear.
The best hydrants are located:
on large water mains that are interconnected in a grid pattern.
What are the two basic pressurized water supply sources used to supply a fire pump?
A hydrant and a supply hose from another fire pump
A reverse lay is used so that ___ can be made before laying a supply line.
The worst hydrants typically are those located:
on dead-end mains.
Negative pump pressure is also called:
When operating at negative pump pressure, as the volume from the fire pump increases, the incoming pressure from the supply source may:
Sets found in the same folder
FAO final exam study guide topic 1
FAO Final exam study guide topic 2
FAO Final exam study guide topic 3
Other sets by this creator
Other Quizlet sets
Chem 471 Exam 1
dsp quiz 2 13-24
Domain 1 - Designing Instruction and Assessment to…