Unit 1 intro to safety
Terms in this set (23)
Describe actions that should never be tolerated in machining environment ?
What things should everyone observe for to remain sage in a machining environment ?
Unsafe situations or actions ,report them immediately to the proper person so they can be resolved
What should be done in case of personal injury ?
Immediately notify supervisor,instructor,or other superior so that proper medical or emergency procedures can begin
What does OSHA stand for & what is it's purpose?
Occupational safety and health administration
Agency of federal government that sets and enforces regulations for workplace safety.companies are required to to follow OSHA rules
List 3 specific clothing items that should not be work in machining setting?
Shorts,skirts,dresses,shirts or sweatshirts with hoods or drawstrings should be removed
If someone around machinery has long hair what should be done?
Long hair should be secured with hat,cap,or hairnet so it doesn't get caught in moving machinery
Never operate machinery without proper _____ in place
What is Ppe
Refers to safety equipment that us to be worn to protect a person from dangers
What is most common and important piece of Ppe that should always be used in machining
What doesNFPA stand for
National fire protection association.704 is used to identify specific types of hazards and their levels of danger.uses the multicolored diamond shaped symbol shown
Hazardous material identification system
Most recent version of hmis method.system is similar to napa but uses colored bars
What is purpose of Nfpa & hmis labeling
Hazardous material rating system quickly identify potential hazards
Safety data sheet
Hazardous material info is contained in this document
Class A fire extinguisher
Ordinary combustion .paper,cloth,wood
Fires in oil,gasoline,paints
Electrical fires.wiring,fuse box
Fire small particles
Environmental protection agency
Protect human health and environment
It employs use of locks & tags to disable equipment
Procedure same as tag out except that tags are replaced with padlocks or other lockout devices
Prevent powering up equipment
Federal agency responsible for conducting research and making recommendations
If level above 115db for 1/4hour over 90db for 8 hours must have hearing aids
YOU MIGHT ALSO LIKE...
CLA Chapter 4 - Safety Principles
Collision Repair Safety Test Review
Medical Chapter 14:1 Using body mechanics
Engineering & Technology Lab Safety
OTHER SETS BY THIS CREATOR
Fluid & electrolyte
patho ch 5
THIS SET IS OFTEN IN FOLDERS WITH...
MCHNac: PRECISION MACHINING TECHNOLOGY Section 1 Unit 2 Careers in Machining
MCHNac: PRECISION MACHINING TECHNOLOGY Section 1 Unit 3 Workplace Skills