Study sets, textbooks, questions
Upgrade to remove ads
CCNA2 v7 Module 7 - DHCPv4
Terms in this set (18)
Which message is sent by a DHCPv4 client to initiate the lease obtaining process?
Which two DHCPv4 messages are sent by the server in the lease obtaining process? (Two answers)
Which two DHCPv4 messages are used in the lease renewal process? (Two answers)
A DHCP-enabled client PC has just booted. During which two steps will the client PC use broadcast messages when communicating with a DHCP server? (Two answers)
An administrator issues the commands:
Router(config)# interface g0/1
Router(config-if)# ip address dhcp
What is the administrator trying to achieve?
Configuring the router to obtain IP parameters from a DHCPv4 server.
When a client is requesting an initial address lease from a DHCP server, why is the DHCPREQUEST message sent as a broadcast?
The client may have requested offers from multiple servers, and the broadcast serves to implicitly decline those other offers.
Which DHCP IPv4 message contains the following information?
Destination address: 255.255.255.255
Client IPv4 address: 0.0.0.0
Default gateway address: 0.0.0.0
Subnet mask: 0.0.0.0
What kind of message is sent by a DHCPv4 client requesting an IP address?
DHCPDISCOVER broadcast message
As a DHCPv4 client lease is about to expire, what is the message that the client sends the DHCP server?
What is the destination IP address when an IPv4 host sends a DHCPDISCOVER message?
If more than one DHCP server is available on the local network, in which order will DHCP messages be sent between a host and a DHCP server?
Discover, Offer, Request, Acknowledge
What is the most likely scenario in which the WAN interface of a router would be configured as a DHCP client to be assigned a dynamic IP address from an ISP?
It is a SOHO or home broadband router.
Which is a DHCPv4 address allocation method that assigns IPv4 addresses for a limited lease period?
What is the reason why the DHCPREQUEST message is sent as a broadcast during the DHCPv4 process?
To notify other DHCP servers on the subnet that the IP address was leased.
How is a DHCPDISCOVER transmitted on a network to reach a DHCP server?
A DHCPDISCOVER message is sent with the broadcast IP address as the destination address.
Which destination IPv4 address does a DHCPv4 client use to send the initial DHCP Discover packet when the client is looking for a DHCP server?
Under which two circumstances would a router usually be configured as a DHCPv4 client? (Two answers)
-The router is intended to be used as a SOHO gateway.
-This is an ISP requirement.
Which address does a DHCPv4 server target when sending a DHCPOFFER message to a client that makes an address request?
Client hardware address
Sets found in the same folder
CCNA2 v7 Module 5 - STP Concepts
Switching - Chapter 2 - Basic Switching Concepts a…
Configure a basic WLAN on the WLC
Other sets by this creator
Chapter 3 - Basic Cryptography
Chapter 1: Modern Network Security Threats
CCNA2 v7 Module 8 - SLAAC and DHCPv6
CCNA 2 v7 Modules 1-4: Switching Concept…
Other Quizlet sets
Quiz 3 a and 3 b
BLAW - CH 10 & 11
Individual Test #1 **KINES 345**
Exposure refers to the amount of light available in a shot at particular lens settings. Proper exposure yields a picture with good brightness and contrast.
Which tool helps you avoid accidental static discharge by keeping you at the same electrical potential as the computer on which you're working?
The four main functions of a computer are inputting data, processing data, outputting the data or information, and communicating the data or information.
The file path in a tag is the