Upgrade to remove ads
Only $35.99/year

CCNA2 v7 Module 8 - SLAAC and DHCPv6

Terms in this set (32)

Which address type is automatically created by default on a host interface when no RAs are received?
Link-local address
Which method best describes stateless DHCP?
SLAAC with stateless DHCPv6 Server
Which two ICMPv6 messages are used in the SLAAC process? (Two answers)
-Router Solicitation (RS)
-Router Advertisements (RA)
Which command must be configured on a router to enable it to join the IPv6 all-routers multicast address ff02::2?
ipv6 unicast-routing
What are the flag settings when a host should use the SLAAC only option?
A=1, M=0, O=0
Which ICMPv6 message is sent by a host in an attempt to locate an online IPv6enabled router to obtain IPv6 addressing information?
Router Solicitation (RS)
What method is used by a host to verify an IPv6 address is unique on the local network before assigning that address to an interface?
DAD (Duplicate Address Detection)
What UDP port do DHCPv6 clients use to send DHCPv6 messages?
547
What DHCPv6 message does a host send to look for a DHCPv6 server?
SOLICIT
What DHCPv6 message does a host send to the DHCPv6 server if it is using stateful DHCPv6?
REQUEST
What flag settings combination is used for stateless DHCP?
A=1, M=0, O=1
What M flag setting indicates that stateful DHCPv6 is used?
M=1
Which DHCPv6 roles can a router perform? (Three answers)
-DHCPv6 client
-DHCPv6 relay agent
-DHCPv6 server
Which command is not configured in stateless DHCPv6?
address prefix ipv6-address/prefix
An IPv6-enabled router is to acquire its IPv6 GUA from another IPv6 router using SLAAC. Which interface configuration command should be configured on the client router?
ipv6 address autoconfig
Other sets by this creator