Only $2.99/month

Terms in this set (111)

Connect the modem to the WAN connection as follows:
On the Shelf, expand Routers.
Drag the cable modem from the Shelf to the Workspace.
Above the cable modem, select Back to switch to the back view of the cable modem.
On the Shelf, expand Cables.
Select the coaxial cable.
Under Selected Component, drag a Coaxial Type F Connector to the port on the cable modem.
Under Selected Component, drag the other Coaxial Type F Connector to the port on the wall plate.
Connect the wireless router to the cable modem as follows:
On the Shelf, expand Routers.
Drag the wireless router from the Shelf to the Workspace.
Above the wireless router, select Back to switch to the back view of the wireless router.
On the Shelf, expand Cables.
Select the Cat6a cable.
Under Selected Component, drag a RJ45 Connector to the Internet port on the wireless router.
Under Selected Component, drag the other RJ45 Connector to the port on the cable modem.
Connect the computer to the wireless router as follows:
Above the computer, select Back to switch to the back view of the computer.
On the Shelf, select the Cat6a cable.
Under Selected Component, drag a RJ45 Connector to the network port on the computer.
Under Selected Component, drag the other RJ45 Connector to a LAN port on the wireless router.
Plug in the cable modem as follows:
On the Shelf, select the Power Adapter.
Under Selected Component, drag the DC Power Connector to the port on the cable modem.
Under Selected Component, drag the AC Power Adapter to the power outlet.
Plug in the wireless router as follows:
On the Shelf, select the Power Adapter.
Under Selected Component, drag the DC Power Connector to the port on the wireless router.
Under Selected Component, drag the AC Power Adapter to the power outlet.
In the TestOut Home app, create rooms for the devices as follows:
On the iPad, select TestOut Home.
In the left corner, select the 3-line icon to create a room.
Select New Room.
In the Room Name field, enter the name of the room.
Select Save.
Repeat steps 1b-1e to create additional rooms.
Configure the Lobby smart devices as follows:
Select the arrow on the right side of the screen to move to the Lobby room you created.
On the Lobby page in the right corner, select + to add a smart device to the room.
In the Pairing Code field, enter the pairing code for the device you wish to add.
Select the smart device.
Select Add Device.
Repeat steps 2b-2e until you've added all the devices for that room.
Select Smart Camera to verify that the camera is working.
Select Done.
Select Smart Light Switch to turn the light on.
Select Smart Lock Switch to lock the doors.
Configure the Main Hall smart devices as follows:
Select the arrow on the right side of the screen to move to the Main Hall room you created.
On the Main Hall page in the right corner, select + to add a smart device to the room.
In the Pairing Code field, enter the pairing code for the device you wish to add.
Select the smart device.
Select Add Device.
Repeat steps 3b-3e until you've added all the devices for that room.
Select Smart Thermostat Temperature to modify the temperature.
Under Cooling, select Down until the temperature reaches 72 degrees.
Select Done.
Configure the Office 1 smart devices as follows:
Select the arrow on the right side of the screen to move to the Office 1 room you created.
On the Office 1 page in the right corner, select + to add a smart device to the room.
In the Pairing Code field, enter the pairing code for the device you wish to add.
Select the smart device.
Select Add Device.
Repeat steps 4b-4e until you've added all the devices for that room.
Select Smart Camera to verify that the camera is working.
Select Done.
Select the Smart Outlet Switch to set it to on.
Select and install a wireless access point on the Workspace as follows:
On the Shelf, expand Wireless Access Points.
Read the device descriptions to identify the correct wireless access point.
Drag the Wireless Access Point, 802.11b/g/n to the Workspace.
Above the wireless access point, select Back to switch to the back view of the wireless access point.
Provide power to the wireless access point as follows:
On the Shelf, expand Cables.
Select the Power Adapter.
In the Selected Component window, drag the DC Power Connector to the port on the wireless access point.
In the Selected Component window, drag the AC Power Adapter end to an outlet on the surge protector.
Connect the wireless access point to the router as follows:
On the Shelf, select the Cat6a cable.
In the Selected Component window, drag a connector to the Ethernet port on the back of the wireless access point.
Above the router, select Back to switch to the back of the router.
In the Selected Component window, drag the other connector to one of the free LAN ports on the switch.
On the front of the laptop, click the wireless switch to enable the integrated wireless network interface on the laptop. This will slide the switch to the ON position.
Connect the laptop to the TrendNet-BGN wireless network and create a wireless network profile as follows:
On the laptop's monitor, select Click to view Windows 10.
In the notification area, select the Network icon.
Select TrendNet-BGN.
Make sure Connect automatically is selected.
Select Connect.
Select Yes to make the computer discoverable on the network.