Study sets, textbooks, questions
Upgrade to remove ads
OSHA Certification Practice Questions.
Terms in this set (96)
Which of the following is an example of an unsafe practice regarding the use of tools.
Using a screwdriver to carve or cut wood.
Which of the following actions may expose workers to electrical shock hazards and should be avoided?
Removing the grounding pin on a three-prong plug
Which of the following statements about guarding techniques is true?
Wear PPE because guards will not protect operator from flying chips and sparks or moving parts of tools
Employers must satisfy all of the following requirements, except:
Determine which manufacturer's requirements and recommendations for a tool shall be followed or ignored.
What should you do if you believe working conditions are unsafe or unhealthful?
Notify your employer first and then OSHA if necessary
Fall protection is required at how many feet or more for the construction industry?
How should a person on the ground control a suspended load being moved?
Use a tag line
How many seconds is it acceptable to stand under a suspended load?
You, your equipment, and materials should stay at least how many feet away from overhead power lines?
A worker mixing chemicals must NOT wear:
How can a worker find out what chemical is in a product that they use?
All of the above
According to OSHA, how often must portable fire extinguishers be visually inspected?
A space that meets the definition of a confined space and contains other recognized serious safety and health hazards is what?
A permit-required confined space
The fire watch at the end of the welding operation must last at least how long?
What material handling-related injury is known to be the number one cause of workers compensation claims?
As an operator, how often should you inspect your piece of mobile equipment?
Each day prior to operation
Which of the following is NOT a factor that affects the load calculation of a crane?
All of the above must be considered
What is the greatest hazard facing a worker while working in a trench?
Which of the following is not one of the fall hazards?
What is the method of protection that we can put right on the edge of the building?
What is the part of the base of the scaffold that allows us to level the platform?
What is one thing that we are not allowed to have with us on a scaffold?
Added unnecessary weight
Access is to get on a scaffold?
Egress is how we leave the scaffold?
How far away from the wall does the rail have to be?
The ratio we work with when we are using an extension ladder is:
How high over the building top does the extension ladder have to be?
Accident perfection is having a willing, positive attitude towards safety and willing to make a safer working environment?
At what height do we have to use fall protection?
Top rail height:
Mid rail height
Weight top rail must support:
Weight mid rail must support:
The movement of free electrons between atoms:
Opposition to current flow:
Material that electricity can flow through easily:
A substance that has a high resistance to electrical charge:
A measurement of electrical force:
Conductive connection method to the earth for protection of an electric charge:
This is the most fatal electrical hazard:
Are all of the following considered an electrical hazard; portable heaters, power strips, extension cords, contact with overhead power lines:
Is PPE a proper protection method toward electricity.
GFCI are not commonly found near water.
If employers put employees through proper training the employees are less likely to have an injury with electricity.
This is the most effective hierarchy of control:
Elimination or substitution
This hierarchy is one that we have to physically change something in the workplace.
To have this Hierarchy be effective it requires the employer and employee to do something.
This hierarchy requires workers to wear something for it to be effective.
This hazard happens when their is a loss of a body part while using a tool.
If we are working with a hammer and a punch to drive out a piece of metal:
We are using a grinder that is throwing sparks and we already have on safety glasses:
If we have long hair and we are working around moving parts what should we do with it:
Put it up in a bun
Workers have the right to work with fully operational tools.
Workers do not have the right to work have proper PPE provided to them.
Workers have the right to work in a safe and healthy work environment.
Where should the OSHA poster be on a work site?
Prominently displayed in the workplace.
What conditions must power tools be kept in?
Safe and dry
Which is not a requirement for stair rails?
Must have a handrail on each side is there are walls
Which of the following scenarios would make you take a ladder out of service?
Ladder is missing labels
We must wear this when we are working near a vehicle.
Which of the following is not an eye protection:
How many decibel's before needed hearing protection?
How many decibel's before we have hearing damage:
Which of the following is an example of an unsafe practice regarding the use of tools?
Using a screwdriver to carve or cut wood
Which term describes a tool that is powered by compressed air?
1. The right of workers to seek safety and health on the job without fear of punishment is spelled out in:
The OSHA 1904 Standards
The right of workers to seek safety and health on the job without fear of punishment is spelled out in:
Parts 1926 and 1910
What type of OSHA inspection is conducted when immediate death or serious physical harm is likely?
OSHA's mission is to:
Protect the Safety and Health of the general public
Investigative reports should seek to find the root cause and develop meaningful corrective actions.
It is OK to ask leading questions when it's obvious the person being interviewed does not know the correct answer.
All incidents should be investigated.
The Safety Manager should be solely responsible for conducting all accident investigations.
The most dangerous place to use electricity is:
In contact with water
Earth, water, concrete and the human body are all conductors of electricity.
The effects of electricity on the human body depend upon all of the following EXCEPT:
Injuries from electrical shock can include which of the following?
All of the above
It is the employer's responsibility to evaluate prospective rescuers ability to respond to a summons in a timely manner.
Permit required confined space entry records must be retained for one year.
Calling 911 is an effective rescue system for confined spaces with IDLH atmospheres.
50% of Permit Required Confined Space fatalities are would be rescuers.
Excavations greater than 5' must be inspected weekly by a Manager.
A "wale" refers to a vertical member of a shoring system.
A trench is narrower than it is deep.
Spoil piles must be 18" from the edge of the excavation.
The 3 conventional fall prevention systems include all of the following EXCEPT
Extension ladder must extend 2' above the landing point when used to access.
Handrails must be capable of supporting how many pounds of force?
Falls are the leading cause of construction workplace fatalities.
Fumes are formed from volatilizing metal.
Global Harmonizing System (Hazard Communication) requires except:
Employers must have data sheets accessible within 48hrs of a known exposure.
Where respirators are necessary employers must provide except:
A tetanus vaccination
Health Hazards In Construction include the following except:
Process Safety hazards are substances or conditions which can cause injury or harm to people, processes, equipment and the environment and which are associated with the properties and behaviors of process materials.
Develop of a written participation plan, consult with employees on PSM development and providing PSM information access to employees are all examples of employee participation.
Process Safety Management is limited only to oil refinery work operations.
Other Quizlet sets
CCD FINAL EXAM