Home
Subjects
Textbook solutions
Create
Study sets, textbooks, questions
Log in
Sign up
Upgrade to remove ads
Only $35.99/year
In-Port OOD
STUDY
Flashcards
Learn
Write
Spell
Test
PLAY
Match
Gravity
Terms in this set (43)
Once every 4 hours between 0800 - 2200
All spaces on the CDJ will be inspected _______________.
Directly responsible for the safety and security of the ship and crew.
What are your responsibilities of the in-port OOD?
0800-2000
When are visiting hours?
10, 17, 23, 27, 36, 40
Transverse Watertight Bulkheads
9 Saltwater Fire plugs 1 1/2'' Diameter
Fire plugs
100 gpm
What is the GPM for the P-100 at 20' Suction Lift?
2.75 hours of continuous use
P-100 running time
1.45 gallon tank
P-100 Fuel Capacity
15 lbs Range: 4-6ft 40 secs of use
CO2 Fire Extinguisher
CCR: 14 Engine Room: 2 Fwd Aux: 2 Under ladder: 2 Athwart Ships Passage: 4 OPS Room: 2
AFFF Canister Locations
97% Sea Water 3% Foam
AFFF Ratio
10 lbs Range: 13-22ft 22 secs of use
PKP Extinguisher
3200 cubic feet per min (cfm)
Box Fan
2000 cfm
Ram Fan
CCR (2-26-6)
Firemain Segregation Location
Bridge and bulkhead outside of Magazine Space (Only CO or OOD can give permission)
Magazine Sprinkler System Activation Stations
Bridge, Outside engine room, PORT side steering gear room
FM-200 Activation Stations (Engine Room)
Bridge, Aft engine room bulkhead, STBD side steering gear room
FM-200 Activation Stations (Generator Room)
Bridge, Outside EDG room, DC locker
FM-200 Activation Stations (EDG Room)
Any work heating above 400 degrees, any sparks
What constitutes Hot Work?
30 mins or until cool to the touch
How long after Hot Work is completed do you stand a fire watch?
4500 psi (4000 allowable) 45 mins of air
SCBA psi and time
10 mins of breathable air
Emergency Escape Breathing Device time (EEBD)
100 psi
Jubilee Patch psi
150 psi
Soft Patch psi
200 psi
Syntho-glass psi
SSDG Room: break glass station, FM200 switch, two gen pull air cut offs
ENG Room: port and starboard engine pull stops, break glass station, FM200 switch
FWD AUX: break glass station
Main Deck HVAC (fantail): break glass station
Emergency Shut Offs
70 psi
How much psi does the P-100 supply to the firemain?
Potassium Bicarbonate (PKP) Weight: 10lbs Range: 13-22 ft Time of use: 22 secs
Dry Chemical Fire extinguisher characteristics (PKP)
Range: 15 - 20 ft Time of use: 60 seconds
AFFF Fire Extinguisher characteristics
100 psi
Minimum Fire-main pressure to generate AFFF Foam?
1300 degrees Fahrenheit (Hydrogen Fluoride)
FM-200 produces toxic gas at which temperature?
1) Supply and exhaust fans shut down. 2) MDEs shut down. 3) Fuel oil pumps shut down. 4) Fuel oil supply MOVs close
What happens when you activate FM-200 in Engine Room?
1) Make hourly round of all spaces. 2) Ensure all gear stored. 3) Correct fire hazards when found. 4) If fire is found - Sound GE, Pipe location and type, Muster, notify SOPA and fire departments, Recall crew
Inport OOD duties and responsibilities
Main Switch board
Where is the local controls for fire pump number one?
Facing Gen Room left side on bulkhead
Where is the local controls for Seawater pumps?
Main Switch Board : 4 breakers Load center panel: 2 breakers EDG: 1 breaker
How do you conduct a reset round?
CAPAC Log, Machinery Status Log, Smooth Log, Weather Log, DC Closer Log
What logs do you maintain onboard?
Common areas
What does C1 supply?
Bridge and C4
What does C2 supply?
7 canisters
How many AFFF canisters do you use for the Engine room?
5 canisters
How many AFFF canisters do you use for the Generator room?
185 GPM
Main Drainage Pumps GPM
Sets with similar terms
301-306 Basic DC bjdanzy
100 terms
301-306 Basic DC
100 terms
Damage Control
33 terms
301-306 Basic DC
100 terms
Other sets by this creator
Underway OOD
105 terms
Spa al Mare PRICING
32 terms
Spa al Mare Massages & Enhancements
9 terms
SPA al Mare Add-on Options
3 terms
Verified questions
ENGINEERING
Determine the specific volume of the refrigerant-134a vapor at 0.9 MPa and 70$^\circ{}$C based on (a) the ideal-gas equation, (b) the generalized compressibility chart, and (c) data from tables. Also, determine the error involved in the first two cases.
ENGINEERING
An ideal gas Carnot cycle with air in a piston/ cylinder has a high temperature of 1000 K and heat rejection at 400 K. During heat addition the volume triples. Find the two specific heat transfers (q) in the cycle and the overall cycle efficiency.
ENGINEERING
Using the colon symbol, create a row vector (assign it to a variable named Fives) with ftve elements that are all 5.
ENGINEERING
A small package is released from rest at A and moves along the skate wheel conveyor ABCD. The package has a uniform acceleration of 4.8 $m/s^2$ as it moves down sections AB and CD, and its velocity is constant between B and C. If the velocity of the package at D is 7.2 m/s, determine (a) the distance d between C and D, (b) the time required for the package to reach D.
Other Quizlet sets
Stats Exam 1
29 terms
1980's and Beyond: Germany
11 terms
Test 1: (13) Process of Genes to Proteins
20 terms
cht 40 muscle relaxants
14 terms