Study sets, textbooks, questions
Upgrade to remove ads
Block 1 study Q's
Terms in this set (101)
Which publication covers E-3 equipment descriptions and technical procedures?
Technical orders: 1E-3G-43-11, 1E-3G-43-1-1-1, and 1E-3G-43-1-1CL-2
Which publication covers policy and E-3 operating procedures?
AFMAN 11-2E-3, Volume 3
Which publication covers EFB operations?
Which minimum publications are required by all mission crewmembers on each flight?
EFB and Aircrew Aids
Which directive dictates the minimum publications required for the mission crew for each flight?
552 Supplement to AFI 11-2E-3, Volume 3
If you find an error in your technical order or AFMAN 11-2E-3, Volume 3, how do you correct it?
AF form 847, Submit to flight manual control office
Operating procedures, techniques, etc., which may result in personal injury or loss of life if not carefully followed.
Operating procedures, techniques, etc., which may result in damage to equipment if not carefully followed.
An operating procedure, technique, etc., which is considered essential to emphasize.
Used to express that requirements are binding and mandatory.
Shall or will
Used to express a non-mandatory desire or preferred method of accomplishment.
Used to express an acceptable or suggested means of accomplishment.
What is required to obtain classified documents from the intelligence office?
Complete AF form 614
How long are you responsible for the protection of classified documents for which you have signed?
Can classified documents be left in the squadron mission planning areas without someone assigned to protect them?
How are classified documents controlled if you leave the aircraft during preflight?
MST can watch over them, or any other cleared aircrew members.
List the duties and responsibilities of the BMT
D. Height measurement
F. Air picture display
G. Recording data
H. Extracting data from spins, OPORDS
I. Control of assigned assets
J. Sensor management
Responsible for the safe ground and flight operation of the E-3. Consists of the AC, Copilot, Navigator, and flight engineer.
Flight crew (Pilot/Copilot, navigator, flight engineer)
An SL, certified for mission command, responsible for the E-3's mission. Performs all applicable duties to support the assigned task, to include mission supervision.
Section lead in charge (SLIC)
Assigned by the SLIC, responsible for conduct of the air battle or execution of their assigned function and supervises assigned operators.
Section lead (SL)
Responsible to the SL for the direction, monitoring, and flight following of assigned aircraft during tactical and air refueling missions.
Air battle manager (AWO)
Responsible to the SLIC for all radar and IFF sensor functions as well as data link operation
Active sensor operator (ASO)
Responsible for weapons and surveillance functions as directed by the SLIC/ Section Lead
Mission systems operator (MSO)
Responsible to the SLIC for the operation and maintenance of radar and IFF systems and their subsystems.
Airborne radar technician (ART)
Responsible to the SLIC for the operation, monitoring, and limited in-flight maintenance of the computer for e-3G mission computing system (MCS) and IPEC.
Computer display maintenance technician (CDMT)/ system technician (ST)
Responsible to the AC/SLIC for the proper programming, maintenance and operation of flight and mission crew communications systems and related equipment.
Mission System technician (MST)/ Airborne communications specialist (ACS)
What is the procedure for handling classified material during an emergency in the simulators?
Follow PLEXSYS direction
What are the two primary exit routes out of the MTC?
Out through the access control room and the south door
Who provides security for all MTC simulators?
What is the emergency signal for the fire detection system? What is your response?
Audio Alarm. Exit the building and follow PLEXSYS personnel instruction
What is the procedure when the simulators loses power?
PLEXSYS will turn off power, and exit the sims
Look at figure 5-8 and locate each functional area, control and feature on the OWS.
1. Gasper valve
2. 60 Hz power switch
3. Keypad record interface panel (comm)
4. Mission audio panel (MAP) (comm)
5. Access door/ keyboard and mouse
6. Oxygen regulator
7. Display panel with console computer
8. Encrypted flash drive (USB port)
9. USB ports for keyboard and mouse
10. Operator/ observer comm jacks
11. Foot switch
(T/F) In order for your tactical bearing and range to be correct, you must change the default setting in the preferences window.
In what local instruction contains standard scope setup?
552 OGI 11-1G
Which four widgets are TDF specific to the dashboard?
Quick edit, track graph, specific track list, and track list
(T/F) the control palette is used to change the Tacsit viewing range and to configure tacsit display elements
Some function keys are inoperable and dimmed until____
One or more editable items are selected
The tags toggles toolbar is used to quickly display tag groups
Sequentially, and individual tag items within a tag group
Generated when a new FTM (Free text message) has been received via Link 16
New free text message
Generated when the performance capacity for a database been exceeded
Generated when the rate at which radar reports are being received is exceeding 80 to 100% of the maximum allowable rate per second
Generated when an arrow is received from another IU
90 to 100% of the capacity for free text messages is reached
Free Text Message Cap
An operator has set an alarm at a specific time or at regular intervals that may be accompanied by a message
The mission software is ready for operational use
What icon on the Alarms window will clear all alerts?
Which of the following is accompanied by an audible bell?
Select the correct number of local points (__) and global points (__) available
How many shortcut keys may you have per particular PAD feature?
What widget allows operator to quickly change track properties?
A customized quick edit button allow operator to ____
Apply values from a saved value set to be the selected track(s)
In order to add a track to the specific track list,____
Right-click on one or more tracks, then select specific track in the context menu
(T/F) The "Track List" presents a table-based view of tracks currently in the system. It allows a user to view, sort, and filter by the values of any track properties.
The E-3 status displays what kinematics of the E-3?
Heading, speed, mode c pressure altitude, and rotodome rotation rate
The "drill" option is used to_____
To open a context menu for a track that is stacked under the currently selected track
On the ID assignment toolbar "SUS" stands for?
DPO on the drop toolbar will ________ when you select a track
Turn Drop Protect on
Object selected, description displayed in upper left corner.
Object selected, description displayed in upper right corner.
Details, are displayed bottom left when cursor rolled over object.
Object details are displayed near an object.
Object detail with table and graph with visual altitudes.
To edit all attributes in the primary/secondary detail boxes.
Click on the Edit All checkbox in the details editor
The Details Editor is used to configure the content and TacSit presentation of_____
Selection, rollover, and tags
Viper 31 is tasked to engage at 43N47E at 1445Z with a single GBU 38. This would indicate what type of TC message?
List the two common TC clients.
MIRC and transverse
(T/F) The SIC computers are integrated with the E-3G computer server.
What are the two methods utilized by the E-3G to connect to SIPRNET?
SIC and IPEC
How would you abbreviate the call sign "Falcon 45" in a typical chat message?
What are private, one-on-one conversations in TC called?
What capability utilizes Inmarsat for a faster, more stable network connection?
(T/F) TC can operate in a limited-bandwidth environment.
(T/F) information in TC can be easily deleted or removed if the information posted was incorrect.
List examples of typical chat rooms the E-3 commonly communicates within TC.
(T/F) In order to use the Initiate Track button you have to correlate the created symbology to a real-time radar/IFF return.
When using Track History, you can choose from these options:
All tracks, selected tracks, or selective categories of tracks
Available options for default TE creation are_______
SAM site, ACM Point, Datalink Point, EW Site, Emergency Point, General TE, Missile Launcher, Radar Site, and Special Weapon.
Which application can be used to invoke Chat by right-clicking on?
Which application is used to view received FTM's, build and send FTM's to external agencies?
When using SIF/CallSign Watch, the track must match_______.
All criteria specified
The TE Editor - Order of Battle - Contributor (EOB) can be used______
Both B and C
To center on an arrow_________
Double-click on the arrow symbol or select "center on" then "Arrow" from the context menu.
Bearing and range tools are used to determine the location of
Tacsit entities relative to other entities or geographic positions
Bearing Range Grid Visibility can be manipulated by the operator through the________
Grid Editor, using the checkboxes, colors, font size and styles.
If a track matches to more than one entry in the SIF/CallSign Watch Window, precedence is given to______?
The track on the first entry in the table
If the "Alert" column in the SIF/CallSign is checked.
A "SIF WATCH" alert is generated
A kill box is________.
A three-dimensional area used to facilitate the integration of joint fires
Further information on Kill Box Employment can be found in__________>
A CGRS grid begins at an________.
Origin point located in the far southwest corner
A CGRS grid counts North with___ and East with____.
After a CGRS grid has been input, where do you go to bring the keypad location up on the TacSit so you can see its boundaries.
Geometries tool: locate Kill Box on drop down
It is the responsibility of the_____ to de-conflict the path of the rocket and report back to the fires unit when clear.
____ are the references used to identify locations north and south of the equator on the Earth's surface.
Parallels of Latitude
Each UTM grid zone is divided into columns and rows to form small squares measuring _____ meters on each side.
______ are simple grids that provide forces a quick way to describe an area of targets or potential targets.
When used to integrate_____ and _______ indirect fires, the kill box will have appropriate restrictions.
Air-Surface/Surface to Surface
During a linear, force on force operation, it is important to display the___ on your scope to maintain SA on where_____ ground forces are located.
A CGRS grid is a regional, AOR specific, geographic reference system commonly used to assigned_____ and _______ and fires.
RE: CGRS grid. Once created, it will______ display on all scopes.
Voicing a CGRS cell or keypad is done by saying the_____, then the military ______, followed by________.
North#1st, phonetic letter, keypad #
The_____ will post banners in the_____ when it (HIMARS) is about to fire.
CAOC, Tac Chat
Sets with similar terms
BSTEC 120 - Windows 10 & Edge
BSTEC 120 - Windows 10 & Edge
Other sets by this creator
Block 5 Study Q's
Block 4 Study Q's
Block 3 study Q's
Block 3 study Q's
Other Quizlet sets
Unit A Notes
Phlebotomy Final (Ch. 5 & Quiz 1)
Radiation Safety Certification Course