Home
Subjects
Textbook solutions
Create
Study sets, textbooks, questions
Log in
Sign up
Upgrade to remove ads
Only $35.99/year
Respiratory Protection
STUDY
Flashcards
Learn
Write
Spell
Test
PLAY
Match
Gravity
Terms in this set (8)
Should SCBA be used during overhaul phase? True or False
True
SCBA is required when oxygen content falls below what percentage?
19.5%
SCBA is required when carbon monoxide atmosphere is greater than ________
25 PPM
What is the efficiency level of a P100 respirator?
99.7%
P100 respirators are strongly resistant to oil. True or False
True
At what stage in a fire should an SCBA be used?
beyond the incipient stage or as directed by the incident commander.
SCBAs shall be worn during what phases of Interior Structural Firefighting operations past the incipient phase?
From the initial operations throughout overhaul completion.
When should air cylinders be replaced and separated from full cylinders?
Cylinders shall be replaced and separated immediately when found to be below 4500psi.
Sets found in the same folder
Industrial injury Cal-OSHA Notification
3 terms
Health and Fitness Program
6 terms
Incident reporting documentation
4 terms
Atmospheric Monitoring and Application of Multi Ga…
5 terms
Other sets by this creator
Drug and Alcohol substance abuse/ testing procedur…
7 terms
Leave of absence
2 terms
Uniform Wearing Policy
2 terms
Hose Inventory - Type 1 Engine
14 terms
Verified questions
ENGINEERING
Describe a few examples of pumps where a fluid is forced to move by “blades” mounted on a rotating shaft.
ENGINEERING
What kind of conic section (or pair of straight lines) is given by the quadratic form? Transform it to principal axes. Express $$ x^T=[x_1 x_2] $$ in terms of the new coordinate vector $$ y^T=[y_1 y_2]. x_1^2-12x_1x_2+x_2^2=70 $$
ENGINEERING
In a manufacturing plant, a quench hardening process is used to treat steel ball bearings $(c = 500 J/kg \cdot K, k = 60 W/m \cdot K, p = 7900 kg/m^3)$ of 25 mm in diameter. After being heated to a prescribed temperature, the steel ball bearings are quenched. Determine the rate of heat loss if the rate of temperature decrease at the ball bearing surface at a given instant during the quenching process is 50 K/s.
ENGINEERING
An adiabatic steam nozzle has steam entering at 500 kPa, $200^{\circ} \mathrm{C},$ and 30 m/s, and leaving as a saturated vapor at 200 kPa. Calculate the second-law efficiency of the nozzle. Take $T_{0}=25^{\circ} \mathrm{C}.$
Other Quizlet sets
DNA/RNA Notes
41 terms
ch 11 and 12
67 terms
wisconsin general insurance law
50 terms
Finance Quiz 2
15 terms