Study sets, textbooks, questions
Upgrade to remove ads
Maintence forms and records
Terms in this set (16)
where is a 100 hour inspection recorded?
in the maintenance records of the applicable equipment
Who makes the final maintenance record entry after a 100 hour inspection has been performed
The person approving for return to service
What entries are required in the aircraft records after a maintenance has been performed?
1. A description or refrence to acceptable dats of the work performed
2. Date of completion
3.The name of the person performing the work
4. The signature of the person approving for return to service
5. the certificate number
6.The kind of certificate held
In addition to the maintenance records, where should a description of a major alteration be recorded
FAA form 337
Who may rebuild an aircraft engine and grant it zero operating time?
The engnine manufactturer or an agency approved by the manufacturer
Where may a mechanic find an example of a 100 hour inspection maintance record entry?
14 cfr 43
What is the usual distribution of FAA form 337 After it is completed?
One signed copy of the form to the aircraft owner and a copy of that form to the FAA
What regulation authorizes a certified mechanic with an IA to approve or dissaprove a major repair?
14 cfr 65.19
What could happen to any person who makes or causes to be made a fradulent or intentionally false entry in any record or report that is required to be kept?
The susoension or revocation of the applicable airmen certificate
Who may make a maintence record entry for approval for return to service after a progressive inspection is performed, when the aircraft is away from home base?
1. A applicable certified mechanic
2. an appropriatley rated repair station
3. The aircraft manufacturer
When is a maintence record entry required to contain the aircraft total time?
When an inspection record entry is made
What is the minimum scope and detail that the checklist must contain when performing a 100 hour inspection
That which is shown in 14 cfr part 43 appendix D
What systems on a rotorcraft are requied to be inspected in accordance with the MM or instruction for continued airworthiness of the manufacturer concerned when performing an inspection required by 14 CFR 91?
1. The drive shafts or similar systems
2. The main rotor transmission gearbox for obvious defects
3.The main rotor and center section
4.The auxiliary rotor on helicopters
How may one identify a recived aircraft part or appliance as serviceable?
1. By an approval for return to service entry in the maintenance record of that equipment
2. FAA form 337
What is the ATA system?
The AIr Transport ASSociataions numbering system to standarize technical data regardless of manufacturer
Sets found in the same folder
Cleaning and corrosion control
Mechanic privileges and limitations
Other sets by this creator
Ice and Rain