hello quizlet
Home
Subjects
Expert solutions
Log in
Sign up
Chapter 2
Flashcards
Learn
Test
Match
The maximum allowed clearance between the door panels and door frame for horizontal sliding doors is:
Click the card to flip 👆
3/8 in. (10mm)
Click the card to flip 👆
1 / 14
Flashcards
Learn
Test
Match
Created by
oliver_stewart19
Terms in this set (14)
The maximum allowed clearance between the door panels and door frame for horizontal sliding doors is:
3/8 in. (10mm)
Vertical sliding doors must overlap the entrance frame at least _____ when closed.
2 in. (50mm)
Repair and maintenance of the in-car emergency light is normally the responsibility of:
The elevator technician.
The closed position of center opening horizontal-sliding doors is when the rigid members of the panels are ____ apart.
3/8 in. (10mm)
The operation of the in-car emergency stop switch or in-car key-operated stop switch should be checked with the elevator:
Near the top landing with a full load.
A hoist way entrance swinging door is in the closed position when it is within ____ of the jamb stop:
3/8 in. (10mm)
When heavy dirt and trash are found in the sills of horizontal sliding doors, they should be:
Removed and your supervisor notified.
When horizontal sliding doors are equipped with nudging, the reopening device must hold the doors for at least ____ before nudging begins.
20 seconds
Firefighters' Service is required to be tested monthly by:
Using the phase 1 key switch and operating to one or two floors using the Phase 2 operation.
An automatic passenger elevator should initially level to within ____ of the landing.
1/2 in. (13mm)