8 terms

Oil - Electrical

oil
STUDY
PLAY
list the voltages found on a domestic gun oil furnace
H.V., 120v, 24v
the electrode voltage on a gun type burner is
10,000v or higher
if the electrodes are located in the oil/air spray they
will become oil drenched and will cause either no ignition or delayed ignition
there are two types of ignition on an oil burner, just like gas and they are
intermittent and interrupted
intermittent and interrupted used to be called
continuous and intermittent
the type of motor found on an oil burner is
split phase or PSC
the type of motor found on an oil furnace is
shaded pole, PSC or ECM
on an oil burner where you can test the transformer voltage with a screwdriver, the spark gap should be not less than
1/2 inch
YOU MIGHT ALSO LIKE...