NetAuth Mod13

Which command is used to enable AAA as part of the 802.1X configuration process on a Cisco device?
dot1x pae authenticator
aaa new-model
dot1x system-auth-control
aaa authentication dot1x
Click the card to flip 👆
1 / 11
Terms in this set (11)
Which command is used to enable AAA as part of the 802.1X configuration process on a Cisco device?
dot1x pae authenticator
aaa new-model
dot1x system-auth-control
aaa authentication dot1x
aaa new-model
Which host-based security measure is used to restrict incoming and outgoing connections?
host-based firewall
guest-based firewall
antivirus/antimalware software
host-based IPS
rootkit
host-based firewall
Which security service is provided by 802.1x?
port-based network access control
protection against emerging threats for Cisco products
malware analysis and protection across the full attack continuum
malware analysis of files
port-based network access control
Which device is used as the authentication server in an 802.1X implementation?
Wireless router.
RADIUS server
.Ethernet switch
.Access point.
RADIUS server
A port has been configured for the 802.1X protocol and the client has successfully authenticated. Which 802.1X state is associated with this PC?
up
enabled
authorized
forwarding
authorized
When using 802.1X authentication, what device controls physical access to the network, based on the authentication status of the client?
The switch to which the client is connected.
The supplicant.
The router that is serving as the default gateway.
The authentication server.
The switch to which the client is connected.
When would the authentication port-control command be used during an 802.1X implementation?
When a client has sent an EAPOL-logoff message.
When the authentication server is located in the cloud.
When an organization needs to control the port authorization state on a switch.
When the authentication server is located in the cloud.
When an organization needs to control the port authorization state on a switch.
Which Cisco appliance can be used to filter network traffic contents to report and deny traffic based on the web server reputation?
TSA
WSA
AVC
ASA
ESA
WSA
A switch has the following command issued as part of an 802.1X deployment. address ipv4 10.1.1.50 auth-port 1812 acct-port 1813 What is the purpose of this command?
It identifies the address of the RADIUS server and ports on the server used for RADIUS traffic.
It identifies the address of the switch to which the client connects and the ports used for the EAPOL messages.
It identifies the address of the RADIUS server and the ports used for EAPOL messages.
It identifies the address of the default gateway and the ports used for traffic destined for remote networks.
It identifies the address of the RADIUS server and ports on the server used for RADIUS traffic.
Websites are rated based on the latest website reputation intelligence. Which endpoint security measure prevents endpoints from connecting to websites that have a bad rating?
spam filtering
DLP
denylisting
host-based IPS
antimalware software
denylisting
Why is it important to protect endpoints? Endpoints are the starting point for VLAN attacks. Endpoints are susceptible to STP manipulation attacks that can disrupt the rest of the LAN. After an endpoint is breached, an attacker can gain access to other devices. A breached endpoint gives a threat actor access to system configuration that can modify security policy.After an endpoint is breached, an attacker can gain access to other devices.