Upgrade to remove ads
CDC 2AX7X VOL.2
Terms in this set (70)
Training detachments (TDs) are administratively assigned to which MAJCOM?
Air Education and Training Command (AETC).
The block training method is normally used to teach which Maintenance Training Flight
(MTF) training course?
How often must the Maintenance Operations Officer/Maintenance Superintendent review
and sign the special certification roster (SCR)?
In order to be given authority to downgrade a "Red-X" an individual must be approved by
the maintenance group commander (MGX/CC) and hold the minimum grade of
Training Business Area (TBA) provides Air Force personnel with global, real-time
visibility of technical qualifications, certifications, and training statuses of personnel.
In the Training Business Area (TBA), what type of notification does the "System Messages"
board provide in addition to software releases, projected downtimes, and training update
What training phase has these four sub-phases: multiphase, MAJCOM mandatory, freeflow,
and maintenance qualification training?
What continuation training consists of academic and practical hands-on courses that
complement initial skills training received through AETC mission ready airman (MRA) and
training detachment (TD) courses?
How often does the maintenance training flight (MTF) provide a status of training (SOT)
briefing to the maintenance group commander (MXG/CC)?
An individual comes due for a training recertification while TDY, on leave, or
incapacitated. Provided it has not been more than 60 days since the original due date, how many
days are allowed after returning before decertification is required?
Who is responsible for conducting an interview with both the trainee and his/her supervisor
before a trainee starts a career development course (CDC)?
Unit training manager
Manpower authorizations are
A meeting to discuss manning issues in the maintenance group (MXG) is normally held
The maximum continuous duty time you can schedule your workers for without getting
maintenance group commander (MXG/CC) approval is
Maintenance group commanders are the final approval authority for exceeding a 12-hour
shift up to
Which agency is normally responsible for monitoring the overall maintenance supply
interface and resolving supply support problems?
Maintenance supply liaison
Maintenance supply liaison personnel report directly to the commander of the
Logistics Readiness Squadron (LRS)
Which of the following is not normally a Maintenance Supply Liaison duty?
Collecting and turning in expendable, excess, and surplus precious metal bearing assets
The assets in a high priority mission support kit (HPMSK) should be transferred into the
host base's Standard Base Supply System account after how many days?
Which expendability, recoverability, and reparability codes (ERRC) must be assigned to an
asset before it can be placed in bench stock?
The goal for bench stock assets is to establish levels to provide how many days of supply?
Provided it is still serviceable, which type of shelf life item are you allowed to inspect and
re-mark with a new expiration date?
Who in the maintenance group (MXG) is responsible for ensuring the capability exists to
meet local manufacture requirements?
Maintenance Squadron (MXS) Operations Officer/Maintenance Superintendent (MX SUPT).
What agency acts as a central repository of engineering drawings and other engineering
Engineering Data Service Center
Which of the following is not an obvious sign of pollution?
Who is responsible for developing a hazard communication (HAZCOM) training plan to
notify personnel of all known hazards they may be exposed to in a particular workcenter?
Which tag should you use to document that a part has been properly drained and/or purged?
AFTO Form 20, Caution Tag
Who must appoint an individual to be an equipment account custodian?
What specific block of supply training must an individual receive before assuming duties as
a due-in from maintenance (DIFM) monitor?
What form is used to document all report of surveys (ROS)?
DD Form 200, Financial Liability, Investigation of Property Loss.
Which Logistics Readiness Squadron (LRS) office accounts for special purpose recoverable
authorized maintenance (SPRAM) assets managed on in-use detail records?
Equipment Liaison Office (ELO)
Unless delegated, who is responsible for reviewing all requests for special purpose
recoverable authorized maintenance (SPRAM) authorizations submitted by SPRAM custodians?
Mission Support Group (MSG) commander.
Which Precious Metals Indicator Code (PMIC) indicates that an item of supply contains a
combination of two or more precious metals?
Which supply tracking document provides information on all document numbers processed
during the day?
D04, Daily Document Register
Which supply tracking document is produced daily and lists all back-ordered parts with an
urgency of need (UND) code of A?
D18, Priority Monitor Report.
Which supply tracking document provides a management product for monitoring issue and
bench stock supply support?
M-24, Organization Effectiveness Report
Who must authorize temporary storage of in-transit classified material in cargo security
cages and alarmed rooms?
Host installation commander
When the aircraft owner or user does not stay with an aircraft which has secret or
confidential equipment installed, she/he must arrange for security checks to be accomplished
Who is the final authority for reviewing a unit's list of supply assets requiring functional
check, calibration, or operational flight programming?
Logistics Readiness Squadron (LRS) Chief Inspector
Who is responsible for determining the appropriate supply delivery priority for a parts
Which urgency justification codes (UJCs) are used to show a supply request for bits and
pieces to repair a line replaceable unit (LRU) or shop replaceable unit (SRU) spare?
AR or BR
Before a supply point can be established and located in a maintenance work area, who must
Maintenance coordinate with?
LRS material management element
Once established, how often must supply point accounts be reconciled by the workcenter
supply point monitor?
When a mission capable (MICAP) part issues and is placed in the tail number bin (TNB),
supply personnel notify the
Maintenance Operations Center (MOC).
When the goal is to get a refund or a new item in exchange, what type of deficiency report
Supply Discrepancy Report
Who has the responsibility for overall Deficiency Report program management for the
submitting organization or group?
Who acts as the Deficiency Report focal point between the support point and submitting
Once a Category I deficiency is discovered, a deficiency report (DR) must be submitted to
the Screening Point within
Which is not normally a Maintenance Group (MXG) technical order distribution office
Establishing technical order distribution account (TODA) sub-accounts as required
What Maintenance Operations Flight section is responsible for periodically reviewing
maintenance information system (MIS) products to ensure proper documentation and
management of time compliance technical orders (TCTOs) by owning and managing agencies?
Plans, Scheduling, and Documentation.
The Product Improvement Manager is usually assigned to what maintenance group (MXG)
Which of the following is not a technical order (TO) change priority category?
Who has the overall responsibility for AF policy governing the TO system?
Who designates cannibalization authorities?
Maintenance Group (MXG) Commander
If a serially controlled item is cannibalized (CANN), the CANN authority is required to
Plans, scheduling, and documentation (PS&D).
Which of the following does not institute a restricted maintenance area?
Weapons loading operations
Red Ball maintenance is not designed to prevent
aircraft status changes
Who designates the Impoundment Official for a particular impoundment situation?
Applicable Impoundment Authority
Who is the office of primary responsibility (OPR) for development of wing procedures for
control and management of tools/equipment used on the flight line and in aerospace maintenance
Maintenance Group Commander (MXG/CC).
How many digits make up an equipment identification designator (EID) code used to
identify tools and equipment?
The Wing foreign object damage (FOD) monitor is normally located within the
Quality Assurance section
The wing foreign object damage (FOD) monitor must notify the MAJCOM FOD manager
within how many hours of a FOD incident?
Which of the following, if inadvertently dropped during aircrew operations, is not
considered a dropped object under the Dropped Object Prevention Program?
A dropped object that has resulted in casualties or property damage must be reported IAW
AFI 10-206, Operational Reporting.
Which AF publication provides general guidance for executing an effective maintenance
AFI 21-101, Aircraft and Equipment Maintenance Management
Who is the Quality Assurance (QA) Chief Inspector directly responsible to for ensuring the
required Maintenance Standardization and Evaluation Program (MSEP) functions are performed?
Quality Assurance (QA) Officer In Charge (OIC)/Superintendent (SUPT).
When a unit has received an unsatisfactory Maintenance Standardization and Evaluation
Team (MSET) rating, the maintenance group commander (MXG/CC) directs Quality Assurance
(QA) to perform a follow-up inspection on the unit within how many days?
What Maintenance Standardization and Evaluation Team (MSET) individual assessment is
an over-the-shoulder evaluation while the technician performs a task?
What Maintenance Standardization and Evaluation Team (MSET) individual assessment is
performed after a technician completes a task?
Quality Verification Inspection
In regards to the modification management program, which agency serves as the operator's
interface with the single point manager for a weapons system?
YOU MIGHT ALSO LIKE...
Volume 2 - Unit Review
2AX7X volume 2
2AX7X Vol. 2 UREs
CDC A4N051 VOL 1
THIS SET IS OFTEN IN FOLDERS WITH...
2AX7X Vol. 1
CDC 2AX7X Vol 1
CDC 2AX7X Vol 2
Air Force CDC 2AX7X Aerospace Maintenance Volume 1…