8.0 Backup and Recovery

STUDY
PLAY

Terms in this set (...)

You have a computer running Windows 7 Ultimate.

You want to use the Backup and Restore console to back up all user files on the computer. You want to include a system image in the scheduled backup.

To ensure you have space for all of the user files and the system image, you install a new 360 GB internal hard drive, boot the computer, and initialize the drive in Disk Management using MBR.

When you run the Backup and Restore console, you cannot include a system image during the backup job.

What should you do?
Format the new drive with NTFS.
You have a computer running Windows 7 Home Premium. The computer has a single hard drive.

You want to use the Backup and Restore console to schedule regular backups. Backups will include all user data files and a system image backup. You want the backups to run unattended.

What should you do?
Choose an external hard drive as the backup destination.
You have a computer running windows 7 enterprise.

The computer has two volumes: C: and D:.

You want to schedule backup jobs of the C: volume to include all user files and a system image of the C: volume.

You want to configure the backup job and the schedule with a minimal amount of effort.

What should you do?
Use the Backup and Restore console.
dows 7.

You have configured scheduled backups in the Backup and Restore console to take a backup each week. You save the backups to a network location.

You find that backups are not being completed because the computer is asleep when the schedule time starts, and the computer is not waking up to perform the backup. The backup destination device is awake and available.

What should you do?
Edit the backup task in Task Scheduler.
You have a computer that runs Windows 7 Professional.

In the Backup and Restore console, you create a backup job that includes all user data files and a system image. The backup runs successfully for several weeks.

You decide that you want the backup to run twice a week. You need to use the least amount of effort possible.

What should you do?
Edit the task in the Task Scheduler.
You have a computer running windows 7 Professional with two volumes.

The C: volume contains system settings and is formatted with NTFS. The D: volume is formatted with FAT32.

You want to create a system image backup with the D: volume as the destination.

What should you do?
Convert the D: drive to NTFS.
You have a laptop computer running Windows 7 Ultimate.

The computer has a single 20 GB internal hard drive and an optical drive. The internal hard drive has a single volume which currently takes all of the disk space.

You want to sue the Backup and Restore console to create a scheduled backup that includes all user files and system image.

You purchase and attach a 30 GB USB flash drive to the computer.

When you run the Backup and Restore console, you select the flash drive as the backup destination. however, you cannot configure the settings to include a system image during the backup.

You want to configure the scheduled backup to include a system image with the least amount of effort.

What should you do?
Purchase and attach an external USB hard disk.
You have a computer running windows 7 Enterprise.

The C: drive holds all system files and is the boot volume. The D: volume holds only user data files.

You want to create a system image backup that includes both the C: and D: drives. You will save the backup to an external disk and archive it in case you need to recover your system.

What should you do?
In the Backup and Restore console, configure a system image backup.
You have a computer that runs Windows 7 Professional. The computer has a single hard drive.

You have scheduled regular backups of the computer to include everything on the hard drive. The backups are stored on a network shared folder.

You need to make a full backup of the computer right now.

What should you do?
Select the CD/DVD drive as the backup destination.
You have a computer running Windows 7 Ultimate.

You want to use the Backup and Restore console to back up all user files on the computer.

To ensure you have space for all of the user files, you install a new hard drive, boot the computer, and initialize the drive in Disk Management.

When you run the Backup and Restore console, it does not show any valid destination drives.

What should you do? (Choose the most correct answer.)
Format the new drive with FAT32 or NTFS.
You have a computer running windows 7 Home Premium.

You schedule regular backups once a week. Backups include all user data files and system image backup.

After the first week, you see that backups are not being completed because the computer is asleep when the backup job is set to run.

You need to make sure that the scheduled backup can wake the computer. You also want to make sure that backup does not run if the computer is on battery power or stops if the computer switches to battery power.

What should you do?
Edit the settings in the Task scheduler
You have a computer running windows 7 Professional.

To protect your data form loss or corruption, you enable System Protection on all the drives in your computer. You also schedule regular backups of the system drive and all other drives using the Backup and Restore console.

After working with a file, you notice that you accidentally deleted most of the data. You need to restore the file to the point in time before you modified it.

What should you do? (Select two. Each answer is an independent solution.)
- Use the file properties to restore a previous version of the file.
- Use Windows Explorer to browse the 'Backup Set' folder and then copy the file.
You have a computer running windows 7 Professional.

The computer has the following two volumes:

* The C: drive is the system drive with user profiles and individual user files
* The D: drive holds data files common to all users

You take the following actions:

* You create a system image backup that includes both the C: and D: drives.
* You schedule regular backups to back up all user libraries. The scheduled backup includes a system image.
* You use System Restore to take a snapshot.

You edit and save a file on the D: drive. You decide that you don't like the changes and want to revert to a previous version of the file.

You go to the 'Previous Versions' tab of the file and see nothing listed.

To avoid this situation in the future, you must ensure that you can revert files on the D: drive to earlier versions of the file from the 'Previous Versions' tab.

What should you do? (Select two. Each answer is a possible solution.)
- Enable System Protection for the D: drive.
- Modify the backup settings in Backup and Restore to include the D: drive.
You have a computer that runs windows 7.

The computer has two hard drives. The C: drive is the system drive, and the D: drive holds data files.

You perform a system image backup using the Backup and Restore console that includes both drives. Your computer takes regular restore point snapshots.

one day you find the D:\finances folder has been deleted. You check the previous versions for the drive, but find nothing listed.

You need to restore the folder and its contents as quickly as possible.

What should you do?
- Mount the .vhd file in the backup, then copy the folder to the drive.
You have a computer running Windows 7 Professional.

The computer has the following drives:

* C: (system drive with user profiles)
* E: (Data files)
* F: (External USB hard drive)

You enable System Protection on the C: drive. You also schedule regular backups with the following settings:

* Back up all user libraries
* Back up the C: and E: drives
* Include a system image
* Save the backup to the F: drive

Last night the E: drive crashed. You need to restore the data files found in the E: drive.

What should you do?
Use the Backup and Restore console to restore data from backup.
You have a computer running Windows 7 Professional.

To protect your system and data, you use the Backup and Restore console to create a system image backup.

While working with a file, you accidentally delete some of the data. You need to restore the older version of the file, but you cannot find any previous versions of the file.

What should you do? (Select two. Each choice is a required part of the solution.)
- Attach the .vhd file created form the Backup and Restore console.
- Use Windows Explorer to browse to and then copy the file.
You have a computer running Windows 7 Professional.

The computer is used by three different users. The computer has the following two volumes with default System Protection settings:

* C: ( System drive with user profiles and individual user files)
* E: (Data files common to all users)

Using the least effort possible, you need to protect the data on both volumes with restore points.

What should you do? (choose the answer which is most correct.)
Enable System Protection for the E: volume.
You have a computer running Windows 7 Professional.

The computer has the following tow volumes:

* The C; drive is the system drive with user profiles and individual user files
* The D: drive holds data files common to all users

You take the following actions:

* You schedule regular backups to back up all user libraries. The scheduled backup includes the entire D: drive, as well as a system image.
* You use System Restore to take a snapshot.

After working with a file on the D; drive, you accidentally delete most of the data in the file. You need to recover the file as it existed before you made the changes.

You check the System Protection settings and find that system protection is not enabled for the D: drive.

Using the least amount of effort, you must restore the data in the file.

What should you do?
Use the 'Previous Versions' tab of the file properties to restore the file.
You have a computer running Windows 7 Professional.

The computer has the following two volumes:

* The C: drive is the system drive with user profiles and individual user files
* The D: drive holds data files common to all users

You take the following actions:

* You create a system image backup that includes both the C: and D: drives.
* You schedule regular backups to back up all user libraries. The scheduled backup includes a system image.
* You use System Restore to take a snapshot.

You edit and save a file on the D: drive. You decide that you don't like the changes and want to revert to a previous version of the file.

You go to the 'Previous Versions' tab of the file and see nothing listed. You need to restore the previous version of the file.

What should you do?
Restore the file form the system image.
You have a computer running Windows 7 Professional.

Although the system drive has plenty of disk space, you add an internal hard drive to increase storage for user files.

For the past several weeks you have created and changed many files stored on the new hard drive.

You want to revert a specific file to a previous version. however, after viewing the file properties, you notice that no previous versions are available.

You must ensure that you can revert files to previous versions on the new hard drive.

What should you do?
Enable System Protection for the new hard drive.
You have a computer running windows 7 Ultimate.

To protect your data from loss or corruption, you enable System Protection on all drives in your computer. You also schedule regular backups with the following settings:

* Back up all user libraries
* Back up all drives
* Include a system image

Today you notice that your user profile settings are corrupt.

You need to restore the user profile settings with the least amount of effort.

What should you do?
Use the Backup and Restore console to restore the user profile form backup.
You have a computer that runs Windows 7.

You install a new art application on your computer. The application recommends that you install an updated video driver. You install the new driver.

You use the computer for several days, but notice that the display doesn't seem to refresh properly. You want to sue your previous display adapter driver to correct the problem. You need to implement a solution that minimizes downtime.

What should you do?
Roll back the display adapter driver.
You have a computer running Windows 7 Ultimate.

You take a regular file backup every Friday night, which also includes a system image backup. System Protection has been enabled for all drives on the system.

On Wednesday you receive a new version of a graphic editing application that you use regularly. You install the new application, but find that the application does not work properly. When you try to run the original application, you find that the upgrade has deleted it from your system. You also find that some of the graphics files you had been working on yesterday have been deleted.

You need to get things back to normal as quickly as possible.

What should you do? ( Select two. Each choice is a required part of the solution.)
- Use Previous Versions to restore the missing files.
- Use system Restore to revert to a restore point before you installed the application.
You have a computer that runs Windows 7.

The computer has two hard disks, one internal disk and one removable hard disk. You complete a full system backup and schedule regular backups of the system drive. All backups are saved to the removable hard disk. You also enable system protection on the system disk.

The disk holding the operating system fails. you replace the disk with a new one, and now need to get the system running again as quickly as possible. you boot the computer to the Windows installation disc.

What should you do?
Perform a system image recovery.
You mange a computer that runs windows 7.

You have just added a new 300 GB hard drive to the computer. You create a single volume named 'Data' and format the volume using FAT32. The volume is assigned drive letter D:.

You copy several files to the new hard disk.

You would like the disk to be included in any restore points created on the computer.

What should you do first?
Run 'convert.exe to change the drive to NTFS.
You have a computer running Windows 7 Ultimate.

You need to create a system repair disc in case you need to recover the Windows installation after a serious error.

You run the Backup and Restore console, but are unable to create the disc.

What should you do?
Install a CD/DVD burner.
You have a computer that runs Windows 7.

The computer has two hard drives, both formatted with NTFS. you have enabled System Restore on both disks.

You want to delete all restore points except for the last restore point.

What should you do?
Run Disk Cleanup.
You have a desktop computer running Windows 7.

After several months of working fine, you are now having problems booting your machine. The system stalls immediately after the BIOS information screen. You need to get the system started as quickly as possible.

What should you do?
Use the Startup Repair tool
You have a computer that runs windows 7.

You have recently made some changes to your system. Things seemed to run fine for several days.

Today, your computer has started to be unstable. Shortly after logging on, the system crashes and hangs.

Which of the following will most likely correct the problem in the least amount of time?
Boot into Safe Mode and restore to a restore point.
You manage a computer that runs Windows 7.

As part of your regular system maintenance, you install the latest operating system updates.

After several days, you notice that the system locks up and reboots from time to time. You suspect that a recent update is causing the problem. You want to restore the computer to its previous state before the updates as quickly as possible.

What should you do?
Restore the system using a restore point.
You have a computer that runs windows 7.

The computer has two hard dries, both formatted with NTFS. You have enabled System Restore on both disks.

You want to delete all restore points, but still be able to make new restore points for both drives.

What should you do?
Edit the System Protection settings in System Properties and delete the restore points.
You have a computer that runs Windows 7.

You install the drivers to connect your new PDA to the computer. Immediately following the device installation, you get a bluescreen error. You reboot the computer but it shows the same error before the boot process completes.

You need to start the computer using the least amount of effort.

What should you try first?
Reboot the system using Last Known Good Configuration from the Advanced Startup options.
You have a computer that runs Windows 7.

You install a new application. During installation, the computer reboots but does not start. Pressing F8 during startup has no effect.

You need to start the computer using the least amount of effort.

What should you try next?
Boot from the installation disc and restore to a restore point.