Vocabulary List 1
Terms in this set (33)
Shows a cut away portion of an object.
Gives a view of all the panels from the front.
Shows how all parts of an item connect together.
Short, sweet and to the point description of the drawing.
Detailed view from above.
Abstract - Uses symbols rather than realistic pictures. Simplified drawing, not detailed.
Precise and accurate detailed description of drawing.
A mode of linear extension of which there are three in space and two on a flat surface, which corresponds to one of a set of coordinates specifying the position of a point.
The measurement or extent of something from end to end; the greater of two or the greatest of three dimensions of a body.
The measurement or extent of something from side to side.
The measurement from base to top or (of a standing person) from head to foot.
The distance between opposite sides of something - The measurement of a layer of a specified material
The distance from the top or surface of something to its bottom.
Written summary of design objectives.
Drawing that must be approved, commented on if needed to change. It is done before construction of the item begins.
A drawing of initial ideas. Allows tolerance of dimensions provided.
Approved drawing that is detailed.
An allowable amount of variation of a specified quantity, especially in the dimensions of a machine or part - The allowed percentage of error
A change or difference in condition, amount, or level, typically with certain limits.
(Of information, measurements, statistics, etc.) correct in all details; exact.
Reduce (something) to small particles or powder by crushing it.
Marked by exactness and accuracy of expression or detail.
Take in or contain (something) as part of a whole; include - Combine (ingredients) into one substance.
Measuring a great distance from end to end.
Measuring a small distance from end to end.
Of great or more than average width.
Of smaller or less than average width.
Of great than average height from top to bottom or to the top from the ground.
Of less than average height from top to bottom or to the top from the ground.
With opposite sides or surfaces that are a great or relatively great distance apart - Great value of thickness.
Having opposite surfaces or sides close together - Less value of thickness.
Extending far down from the top or surface.
Of little depth.
YOU MIGHT ALSO LIKE...
BTE 100 Word List for Engr classes English (WebClass)
semester 2 exam vocabulary Tarriq williams
OTHER SETS BY THIS CREATOR
All Vocabulary Lists (1,2 and 3) Mixed
Graphic Set (Vocabulary Lists 1,2 and 3)
Vocabulary List 3