Upgrade to remove ads
Basic Hand Tools Identification/Pictures
Basic Hand Tools in the Engineering and Technology Education shop
Terms in this set (50)
Carpenter's tool used to drive and pull nails.
Tool used to drive nail heads below the surface.
A saw with small teeth (more teeth per inch) for cutting across the grain of wood.
A saw with larger teeth (fewer teeth per inch) for cutting with the grain of wood.
Hand saw with short thin blade held by a bow-shaped frame used to cut irregular shapes in wood.
A saw with very fine teeth and is often used in a miter box for cutting angles. The thin blade is reinforced with a ridge of thicker metal along the back of the saw. It cannot cut deeper than the ridge.
key hole saw
Short hand saw with a tapered blade used to cut curves or irregular shapes.
A saw used for cutting metal.
A frame with legs, used to support pieces of wood being sawed.
wood turning tools
A set of tools used to cut wood on a wood lathe.
A wood worker's tool used to glue boards together. Is made up of a long metal bar with a clamp jaw at each end.
A double screw clamp with wooden jaws. Useful in furniture construction and repair.
These clamps have a ratchet mechansim that quickly slides into place. You squeeze the trigger to hold fast and squeeze again to release the grip.
A tool used for removing material from a surface.
A steel hand tool with small sharp teeth used for sharpening or shaping.
A sharp-pointed tool for marking wood or metal.
An all purpose knife used for cutting.
An adjustable metal device used for holding metal for forming or cutting.
brace and bit
A type of hand drill consisting of a bit and a brace to hold and turn it.
A small portable drill held and operated by hand.
wood worker's vise
An adjustable device used to hold wood for forming or cutting.
A carpenter's plane for rough surfacing.
A carpenter's plane for finish work.
A small carpenter's plane used on end grains of wood.
Shurform pocket plane
A small plane made by the Shurform company and used to form wood and other materials. The cutting surface is similar to a cheese grater.
wood carving tools
A set of tools used to shape wood projects.
flat head screw driver
A tool used to put in slotted screws.
phillips head screw driver
A tool used to put in cross-head screws.
Eye protection to protect eyes from the impact of foreign objects.
Eye protection to protect eyes from all directions.
Face and eye protection against flying debris.
A common tool with a rubber head designed to protect the surface being struck.
A combination tool with rubber and plastic heads designed to protect the surface being struck.
A light tool that is used to drive tacks. One surface is magnitized to hold the tack.
ball peen hammer
A tool having one end of the head hemispherical and used in working metal.
A tool with a leather head, which is designed to project the surface being struck.
A retractable tool used to measure.
A tool used to measure "to scale".
A ruler able to accurately measure great lengths.
A tool commonly found on the work bench, which is usually longer than 12 inches.
cloth measuring tape
A flexible tool commonly used by a seamstress to measure shapes that may not be straight, such as the waist on a person.
A tool used in the building trades to make a straight line on a vertical surface.
A tool with an indicator that establishes the horizontal or vertical, when a bubble is centered in a tube of liquid.
A trianglular marking tool containing both 90 and 45 degree angles. It has a flange on one side so you can "square" it against the material.
An L-shaped tool used to mark or measure materials and check for uniformity and "square".
An adjustable carpenter's tool for identifying and marking angles.
A sliding square mounted on a steel rule, used to mark a "square" line, find level, or measure.
Woodworking tool used to mark a line at 90 degrees to the edge of the wood or finding "square".
Mouth and nose protection against airborne particles.
A woodworking tool for cutting, shaping, or smoothing wood.
THIS SET IS OFTEN IN FOLDERS WITH...
Welding - Fractions to Decimals
Intro to Construction Math - 000102-9
YOU MIGHT ALSO LIKE...
Basic Hand Tools - Carpentry
Basic Hand Tools 1
Basic Hand Tools
carpenter's Hand Tools
OTHER SETS BY THIS CREATOR
College and Career Readiness
Plumbing Code Requirements
Introduction to Masonry - Module 28101-04
Module 9 Basic Stair Layout