JoeWinn 75/75 08 Fire Pro

An illuminated L/R ENG OVHT Light indicates an _____
Click the card to flip 👆
1 / 36
Terms in this set (36)
An illuminated red FWD or AFT Cargo Fire Warning Light indicates _____• Smoke is detected in associated cargo compartment [8.10.5/8.10.4]An illuminated red APU Fire Warning Light indicates an _____• APU Fire is detected [8.10.5]The APU automatically shuts down for a detected fire _____• On the ground with both engines shut down •• (Only in the 757 Vol II) •• (what about in flight?) [8.10.5]Pulling an APU Fire Switch will: • Close the _____ • Close the _____ • Trip the _____ • Arm the _____ • Silence the _____• APU Air Supply Valve • APU Fuel Valve • APU Generator • APU Fire Extinguisher Bottle • Fire Bell [8.10.6/8.10.5]An illuminated red WHL WELL FIRE Light indicates a _____• Fire is detected in one or both of the main gear wheel wells [8.10.6/8.10.5]An illuminated Fire/Overheat Test Panel FAIL P-RESET Light indicates a _____• System Failure of (all/both) detectors for: •• Engine Fire •• Engine Overheat •• APU Fire •• Cargo Fire [8.10.9/8.10.8]Pushing the Fire/Overheat Test Panel SYS FAIL P-RESET Switch will _____ and _____• Extinguish the FAIL P-RESET Light • Reset the monitor for other systems [8.10.9/8.10.8]The Main Gear Wheel Wells have a fire _____• Detection Sys but no Fire Extinguishing Sys [8.20.1]The Main Gear Wheel Well Fire Detection System will not detect _____• Hot brakes alone, without an associated fire [8.20.1]The indications of an Engine Fire Warning are _____• Fire Bell • Red Master WARNING Lights • Red Discrete FIRE Warning Light • L/R ENGINE FIRE EICAS Message • Fuel Control Switch illuminates. • Fire Switch illuminates and unlocks [8.20.1/8.20.2]The Engine Fire Bell can be silenced by _____• Extinguishing the fire • Pushing either MW/C Reset Switches • Pulling the Fire Switch (• Pressing the Cargo ARMED Switch) [8.20.2 and Systems Study Guide]The indications of an Engine Overheat Caution are _____• Caution Beeper • Amber Master CAUTION Lights • L/R ENG OVHT EICAS Message • L/R ENG OVHT Light [8.20.2]The indications of an APU Fire Warning are _____• Fire Bell • Red Master WARNING Lights • Red Discrete FIRE Warning Light • APU FIRE EICAS Message • Fire Switch illuminates and unlocks • APU automatically shuts down [8.20.3/8.20.4]The additional indications of an APU Fire Warning on the ground are _____• Nose Gear Strut Horn • APU Gnd Cntl Pnl Fire Warning Light [8.20.3/8.20.4]The Main Wheel Well Fire Detection System consists of a _____• Single Fire Detection Loop [8.20.4/8.20.6]System monitoring of the Cargo Smoke Detectors is accomplished _____• Only when a test of the system is done [8.20.5/8.20.7]System monitoring of the Cargo Smoke Detectors is only accomplished when a test of the system is done either _____ using the _____ or _____ anytime _____• Manually • ENG/APU/CARGO Test Switch • Automatically • Electrical power is applied or transferred [8.20.5/8.20.7]The Fire Extinguishing Agent may cause the Cargo Compartment Fire Warning to _____• Remain even after the fire has been extinguished [8.20.5/8.20.7]On aircraft with two or more Cargo Fire Extinguisher Bottles but only one Discharge Switch, the remaining bottle or bottles _____• Will automatically discharge at a later time [8.20.5/8.20.8]Automatic testing of the Engine Fire and Overheat Detectors, APU Fire Detectors and Cargo Compartment Smoke Detectors occurs when _____• Electrical power is initially applied [8.20.6/8.20.8]A double Engine or APU Loop Failure will result in an illuminated _____ Light along with a _____ EICAS Advisory Message• F/O Test Panel SYS FAIL P-RESET • FIRE/OVHT [8.30.1]In order for the Cargo Fire Detection System to signal a Cargo Fire, _____ Detectors must _____• Both • Detect smoke [Ground School Instructor]The Cargo Fire Detection System has _____ Detectors in each Cargo Compartment• Two [Ground School Instructor]A failed Cargo Compartment Smoke Detector will be indicated by _____ and a subsequent Cargo Compartment Fire will be indicated by a _____• Nothing • Status Message [Ground School Instructor]The Wheel Well Fire System is tested _____• Only during a Manual Wheel Well Test [Ground School Instructor]A single Engine or APU Loop Failure will result in a _____• Status Message only [Ground School Instructor]